Boost Your Nissan Skyline GTR with Turbosmart Duel Port Blow off Valve

Boost Your Nissan Skyline GTR with Turbosmart Duel Port Blow off Valve

Table of Contents:

1. Introduction
2. Installing the Turbosmart Block Balance
3. Removing the Bumper
4. Dropping the Turbos
5. Lowering the Rear Turbo
6. Lowering the Front Turbo
7. Putting on the Oil Separator
8. Assembling the Turbos
9. Uninstalling the Bluff Valves
10. Bolt in the New Bluff Valves
11. Venting to Atmosphere or Recirculating?
12. Changing the Intake System
13. Mounting the Turbos
14. Replacing the Vacuum Lines
15. Finishing the Assembly
16. Testing the Block Valves
17. Grinding the Bumper
18. Installing the Bumper
19. Final Touches
20. Summary

Installing the Turbosmart Block Balance

In this article, we will be discussing the installation of the Turbosmart block balance on the GTR. This modification is designed to improve the performance and efficiency of the car's turbo system. We will go through each step of the installation process, starting with the removal of the bumper. We will also address common concerns regarding the compatibility of different components and discuss the pros and cons of venting to atmosphere or recirculating. So, if You’re ready, let's dive in and get started!

Introduction

The Turbosmart block balance is an essential component for optimizing the performance of the GTR's turbo system. This modification allows for better control of boost pressure, which results in improved power delivery and overall driving experience. In this article, we will guide you through the installation process, providing step-by-step instructions and tips to ensure a successful installation.

Removing the Bumper

Before we can begin installing the Turbosmart block balance, we need to remove the bumper to gain access to the turbo system. This process may vary slightly depending on the specific model of the GTR, but generally involves removing a series of bolts and clips that secure the bumper to the chassis. It is important to take your time and be careful not to damage any surrounding components during this step. Once the bumper is removed, we can move on to the next stage of the installation.

Dropping the Turbos

Now that we have removed the bumper, we can proceed with dropping the turbos into place. This step may seem daunting, but with the right technique, it can be relatively straightforward. Start by lowering the rear turbo into position, making sure to prop it down underneath to clear space for the front turbo. Once the rear turbo is in place, lower the front turbo onto the studs and secure it with a couple of nuts. The whole process should take around 10 minutes, and with some slight adjustments, the turbos should fit perfectly.

Lowering the Rear Turbo

When lowering the rear turbo into position, it is essential to be careful and precise. Prop the turbo down underneath to Create enough space for the front turbo. By doing so, you will prevent any interference or complications when positioning the turbos.

Lowering the Front Turbo

With the rear turbo securely in place, it's time to lower the front turbo onto the studs. This step requires accuracy and Attention to Detail to ensure a proper fit. Carefully Align the turbo and secure it with a couple of nuts. Take your time and double-check that everything is aligned correctly before proceeding.

Putting on the Oil Separator

Before completing the turbo installation, it is important to put on the oil separator. This component plays a vital role in keeping the turbo system functioning efficiently. By preventing oil contamination, the oil separator helps prolong the life of the turbos and ensures peak performance.

Assembling the Turbos

Now that the turbos are in place, it's time to assemble them. Take the time to ensure all the components fit together snugly and securely. Use the provided nuts and bolts to fasten the manifolds onto the studs. This step is crucial to guarantee the long-term stability and performance of the turbos.

Uninstalling the Bluff Valves

Before we can install the new Turbosmart block balance, we need to uninstall the existing bluff valves. Locate the bluff valves on the driver's side, just underneath the headlights. You will Notice that they are paired up, making the uninstallation process straightforward. Remove the hose clamps and bolts that secure the bluff valves and set them aside for future use or replacement.

Bolt in the New Bluff Valves

With the old bluff valves removed, it's time to bolt in the new Turbosmart block balance. These new valves are designed to improve performance and reliability compared to the stock ones. Follow the provided instructions to ensure proper installation. Take the time to double-check that all connections are secure and tight.

Venting to Atmosphere or Recirculating?

One crucial decision you'll need to make during the installation process is whether to vent the block valves to atmosphere or recirculate the air. Each option has its pros and cons, so it's essential to understand the implications before making a decision. Venting to atmosphere allows for a more aggressive sound and potentially better turbo response, but it may not comply with emissions regulations. On the other HAND, recirculating the air keeps the system quieter and helps maintain emissions compliance.

Changing the Intake System

Depending on your specific setup and goals, you may consider changing the intake system. This can affect the overall performance and characteristics of the turbo system. One popular option is switching to the rear and front inlet HKS intake system, which eliminates the need for mass airflow sensors and improves airflow. However, keep in mind that this modification may require additional changes to the block valves and other components.

Mounting the Turbos

By this stage, the turbos should be securely mounted and ready for action. Take the time to ensure that all connections are tight and secure. Be mindful of any potential clearance issues, especially with the bumper or other nearby components. A well-mounted turbo system will operate more efficiently and reliably.

Replacing the Vacuum Lines

As part of the installation process, it is recommended to replace the old vacuum lines with new ones. Over time, the vacuum lines can deteriorate, leading to potential performance issues or boost leaks. To ensure optimum performance and reliability, invest in high-quality vacuum lines that can withstand the demands of the turbo system.

Finishing the Assembly

With the turbos mounted, the block valves installed, and all connections secured, it's time to finish the assembly. Double-check that all components are properly aligned and positioned. Tighten any remaining bolts or clamps to ensure everything is secure. This attention to detail will help prevent any issues down the line and ensure a smooth operation.

Testing the Block Valves

Before calling the installation complete, it is crucial to test the block valves to ensure they are functioning correctly. A vacuum Pump can be used to check if the springs open at the desired boost pressure. This step will provide peace of mind knowing that the block valves are reliable and performing as expected.

Grinding the Bumper

Sometimes, minor modifications to the bumper are required to ensure a perfect fit with the newly installed block valves. Using a grinder or similar tool, carefully Shape the edge of the bumper to match the contour and arc of the block valves. This step will prevent any potential rubbing or interference, ensuring a clean and professional-looking installation.

Installing the Bumper

With the necessary modifications made to the bumper, it's time to reinstall it onto the car. Carefully align the bumper with the chassis and secure it with the bolts and clips. Take the time to ensure that all connections are fastened correctly and that there is adequate clearance for any nearby components.

Final Touches

Before wrapping up the installation, take a moment to clean up any leftover debris, Dust, or evidence of the installation process. Vacuum the workspace and surrounding areas to maintain a clean and organized environment. This attention to detail will leave a positive impression and ensure a professional-looking result.

Summary

In conclusion, the installation of the Turbosmart block balance is a worthy investment for any GTR owner looking to optimize their turbo system's performance. By following the steps outlined in this article, you can confidently complete the installation process and enjoy all the benefits this modification has to offer. Remember to take your time, double-check all connections, and address any concerns or issues along the way. With the Turbosmart block balance installed, you can enhance the driving experience and unlock the full potential of your GTR.