Brew Better with Reverse Osmosis RO Filter Install and Review

Brew Better with Reverse Osmosis RO Filter Install and Review

Table of Contents

1. Introduction
2. Unboxing and Contents
3. Installation Steps
   • Placing the Filter
   • Finding the Stud
   • Marking and Screwing in the Brackets
   • Mounting the Filter
   • Installing the Lines
4. Testing the System
   • Filtering Process
   • Water Waste Ratio
5. Review and Considerations
   • Water Taste
   • Wasted Water
   • Personal Experience
6. Conclusion

Introduction

In this article, we will be discussing the Aqua Aquatic Arrow Buddy RO filter, a convenient and efficient device that can be easily attached to your tap. We will go over the unboxing and contents of the filter, the step-by-step installation process, testing the system, and provide an overall review and considerations to keep in mind.

Unboxing and Contents

Upon receiving the Aqua Aquatic Arrow Buddy RO filter, You will find that it comes with the necessary attachments and components. The Package includes the filter itself, an RO membrane capable of filtering up to 50 gallons per day, various lines, clips, a wrench for tightening, and other fittings. One of the most essential parts included is the faucet adapter, which allows you to hook the filter directly to your tap without the need for any permanent fixtures.

Installation Steps

1. Placing the Filter

Before starting the installation process, it is important to decide where you want to place the filter. It is recommended to choose a location that is clear of any obstructions and not directly above the sink to avoid interference while cleaning. The filter can be mounted on the wall using the provided wall mounting brackets.

2. Finding the Stud

To ensure the stability of the filter, it is crucial to locate and mark the position of the stud on the wall. Once the stud is found, mark the top hole and measure eight inches down to mark the bottom hole. These markings will serve as a guide for screwing in the brackets.

3. Marking and Screwing in the Brackets

Using the marked holes as a reference, screw in the brackets. It is recommended to use 1.5 or 2-inch screws, ensuring that they are secure and provide ample support for the filter.

4. Mounting the Filter

To install the filter, first, remove the existing lines on the filter by pulling down the clips and disconnecting the fittings. Unscrew the top of the filter, place the RO membrane inside, and tighten it. Then, reconnect the lines and secure them with the clips to minimize the chance of leaks.

5. Installing the Lines

Start by mounting the filter on the wall and pushing in the lines. Begin with the source line, pushing it in and clipping it securely. Measure down to the tap, cut the line with a little extra length for ease of connection, and attach the faucet adapter. Next, install the waste water line, ensuring it is long enough to reach the drain easily. Lastly, connect and clip the filtered water line, leaving some extra length for flexibility.

Testing the System

After the installation is complete, it is important to test the system to ensure its functionality and efficiency.

Filtering Process

During the preliminary rinse, observe how the filter fills the waste water cup compared to the clean water cup. This will give you an idea of the filter's performance. Measure the amount of filtered water and waste water to determine the water waste ratio.

Water Waste Ratio

The Aqua Aquatic Arrow Buddy RO filter has a water waste ratio of approximately five to one. This means that for every gallon of filtered water produced, approximately five gallons of water are wasted in the process. It is crucial to consider this factor, especially if you are using the filter for large-Scale purposes.

Review and Considerations

Water Taste

The filtered water produced by the Aqua Aquatic Arrow Buddy RO filter is clean and tastes similar to regular water. It effectively removes impurities and provides a refreshing drinking experience.

Wasted Water

One of the major drawbacks of the Aqua Aquatic Arrow Buddy RO filter is the considerable amount of water wastage. The five to one water waste ratio means that a significant amount of water is discarded during the filtration process. This can be an issue, especially if you are on a water meter or have limited access to water.

Personal Experience

Based on personal experience, the Aqua Aquatic Arrow Buddy RO filter installation was relatively straightforward. However, it is essential to ensure that the filtered water does not drain back into the system, as it can lead to unexpected water loss. Plumbing adjustments may be necessary to avoid such situations.

Conclusion

The Aqua Aquatic Arrow Buddy RO filter is a convenient and easy-to-install device that provides filtered water directly from your tap. It effectively removes impurities and delivers clean and refreshing water. However, it is crucial to consider the water waste ratio and personal plumbing configurations before installing the filter. Overall, the Aqua Aquatic Arrow Buddy RO filter is a reliable choice for those looking to improve the quality of their drinking water.