Easy Installation Guide for ICEPURE UTR400 Reverse Osmosis Water Filtration System

Easy Installation Guide for ICEPURE UTR400 Reverse Osmosis Water Filtration System

Table of Contents

  1. Introduction
  2. Ice Pure UTR 400A Reverse Osmosis Filtration System
  3. Accessories Included with the System
  4. Tools Needed for Installation
  5. Installation Process
    • Finding a Suitable Location
    • Checking Water Inlet Valve Measurements
    • Installing Feed Water Adapter
    • Installing Drain Saddle
    • Installing RO Smart Faucet
    • Connecting Tubing
    • Installing Filters
  6. Starting Up the System
  7. Indicator Instructions
  8. Filter Replacement
  9. Resetting the Filter Life Indicator
  10. Troubleshooting and Customer Support
  11. Benefits of the Ice Pure UTR 400A Reverse Osmosis Filtration System

Introduction

In this article, we will be introducing and instructing You on how to install the Ice Pure UTR 400A reverse osmosis filtration system. Icepear, established in 2000, has been developing products in the water treatment industry for 20 years. The Ice Pure UTR 400A is a highly efficient and reliable water filtration system that has sold over 200 million pieces and served over 70 million American households. By following the step-by-step installation guide and understanding the features and benefits of this filtration system, you can enjoy pure and filtered water without worries.

Ice Pure UTR 400A Reverse Osmosis Filtration System

The Ice Pure UTR 400A is a top-of-the-line reverse osmosis filtration system designed to remove impurities, contaminants, and heavy metals from your tap water. With its advanced filtration technology, this system provides you with clean, crisp, and great-tasting water for all your household needs. Whether you're drinking, cooking, or even using water for your plants, this filtration system ensures the highest level of purity.

Accessories Included with the System

Before installing the Ice Pure UTR 400A, let's take a look at the accessories included with the system. These accessories are essential for a smooth and successful installation process. Here is a list of the accessories you will find in the box:

  • Reverse osmosis filtration system
  • PPC sediment filter (combining sediment filtration and activated carbon block)
  • RO filter
  • 3/8 inch Inlet water tubing with feed water adapter
  • 1/4 inch white tubing for pure water
  • 1/4 inch red tubing for waste water
  • Manual
  • Accessory box containing:
    • Smart faucet
    • Drain saddle
    • Tube cutter
    • Teflon tape
    • Quick Connect fitting
    • Quick Connect release tool
    • Two adapters
    • Six lock clips
    • Power adapter

Make sure you have all the accessories laid out and ready for installation before you begin.

Tools Needed for Installation

To install the Ice Pure UTR 400A, you will need a few tools. Here is a list of the tools you may need during the installation process:

  • Variable speed drill
  • 1/4 inch drill bit for the waistline
  • 1 inch drill bit for the faucet
  • Towel
  • Adjustable wrench or pliers
  • Screwdriver
  • Flashlight

Having these tools on HAND will make the installation process easier and more convenient. Gather all the tools and ensure they are in good working condition before you begin.

Installation Process

Now, let's proceed with the step-by-step installation process of the Ice Pure UTR 400A reverse osmosis filtration system. By following these instructions, you will be able to set up the system in no time.

Step 1: Finding a Suitable Location

Start by finding a suitable place to install your RO system. Keep in mind that it should be away from walls or heat sources. This system is intended for cold water only.

Step 2: Checking Water Inlet Valve Measurements

Check the measurements of your water inlet valve under your kitchen cabinet. Most sizes are either 3/8 inch or a half inch FIP. For a half-inch FIP inlet valve, use the two adapters supplied in the accessories box. For a 3/8 inch inlet valve, no extra adapters are needed.

Step 3: Installing Feed Water Adapter

To install the feed water adapter, first, close the inlet water valve and keep the main faucets turned on. Put a towel under the inlet valve to catch any dripping water. Disconnect the faucet hose from the water inlet. Connect the feed water adapter with the gasket and tighten it with a wrench. Connect the faucet hose to the feed water adapter and tighten it up.

If you have a half-inch inlet valve, use the two converters provided in the accessory box. Connect the half-inch FIP to the 3/8 compression on the inlet water valve and tighten it with an adjustable wrench. Connect the feed water adapter to the converter and tighten it with an adjustable wrench. Connect the 3/8 compression to half-inch FIP to the water adapter and tighten it with an adjustable wrench. Connect the faucet hose to the 3/8 compression to half-inch FIP and tighten it with an adjustable wrench.

Step 4: Installing Drain Saddle

Find a convenient spot on the drain pipe to install the drain saddle. It is better to install it vertically for better functionality. Drill a quarter-inch hole on that spot of the pipe, being careful not to break the other side of the pipe. Stick the foam seal on the front plate, making sure to Align it with the hole. Insert the red waste water tubing about 0.6 inches into the hole. Secure the back plates to the front plate by inserting the screws. Pop the lock clip onto the foot to secure the connection.

Step 5: Installing RO Smart Faucet

If you have a suitable hole in the sink, you can skip this step. Otherwise, drill a suitable hole (around 1.02 inches) in the countertop or sink for faucet installation. The hole is usually 0.6 inches near the edge of the sink so that the faucet can cover the inside and outside of the sink when rotated. Insert the faucet stem and power cord into the hole. Insert the Quick Connect fitting onto the faucet stem and connect the white quarter-inch pure water tubing into the Quick Connect fitting. Secure them in place with the two Blue lock clips. Confirm that the tubing is correctly installed by pulling on the connection to ensure it cannot be pulled out.

Step 6: Connecting Tubing

The Ice Pure UTR 400A has a user-friendly design for connecting the tubing. There are three simple steps to follow: white to white, blue to blue, and red to red. Cut the tubing to the proper length for your installation situation. Use a pipe cutter and make sure the cutting edge is perpendicular to the surface of the pipe. Press the pipe cutter and ensure the surface of the pipe is flat.

To install the inlet water tubing, take the blue 3/8 inch Inlet water tubing that has been connected to the feed water adapter. Insert one end of the tubing into the inlet water port on the system and connect the lock clip. Pull on the tubing to Create a suitable gap between the lock sleeve and the port fitting. Install the lock clip.

To install the waste water tubing, take the red quarter-inch waste water tubing that has been connected to the drain saddle. Insert one end of the tubing into the waste water port on the system and lock it in place with a lock clip.

To install the pure water tubing, take the white quarter-inch pure water tubing and insert one end into the pure water port on the system. Lock it in place with a lock clip.

Connect the power cord, which is attached to the RO faucet, into the faucet connector and tighten it.

Insert the DC head of the power adapter into the power port at the top of the housing. Note: Do not connect the power socket yet.

After completing the tubing connections, double-check that everything is installed correctly and there are no leaks.

Step 7: Installing Filters

Now, you need to install the filters. Remove the RO system cover and locate the PPC filter and RO filter. Each filter is marked with a logo. Align the button on the top of the filter horizontally to the notch on the appliance and push the filter into it carefully. Repeat the same process for the RO filter. Place the cover back onto the system.

Step 8: Starting Up the System

Once you have confirmed that everything is installed correctly, you can start up the system. Follow these steps:

  • Turn on the cold water supply valve and the feed adapter.
  • Turn off your faucet and turn on your RO faucet.
  • Plug in the power adapter and the system lights will flash alternatively for 30 seconds and begin a rinse cycle.
  • After 30 minutes, there will be an alarm sound to indicate that the flashing time is over. Turn off the power and then turn it on again. This will reset the system, and it can be used normally.

Make sure to check each connection for any leaks during the starting up process. If there are any leaks, close the cold water supply and fix them accordingly.

Indicator Instructions

The Ice Pure UTR 400A system has indicator lights and displays to provide you with important information regarding the filter life and system status. Here's a breakdown of the indicator instructions:

  • Power Light: When the system is powered on, the power light will stay white.
  • Filter Life Indicator: The filter life indicator will indicate the status of the PPC filter and RO filter. If the filters are near their expiration date, the indicator light will flash red and white alternately. If the filters have expired, the indicator light will remain red and beep 10 times continuously.
  • Faucet Display: The smart faucet's outer ring lights up when water production is on. The display shows the filtered water's total dissolved solids (TDS) figure in real-time. When the filter has reached 90% of its service life, the RO system indicator light flashes red and white, and the "Please Replace Filter" light on the faucet display flashes.
  • Reminder of Replacing the Filter: When the filter has reached its service life, the RO system light will be red, and the "Please Replace Filter" light on the faucet display will always be on.
  • Real-Time Water Quality Display: The smart faucet's real-time water quality display ensures that you can drink healthy and pure water every time. It provides peace of mind by indicating the quality of the filtered water.

Filter Replacement

The Ice Pure UTR 400A filtration system makes filter replacement quick and effortless. Compared to other filters that need to be swapped out regularly, these filters are designed with one-touch technology, allowing you to finish the filter replacement in seconds. Here's how to replace the filter:

  • Close the feed water adapter and remove the RO system cover.
  • Press the button on the RO system and pull out the filter.
  • Open the Package of the new filter.
  • Align the button on the top of the filter horizontally to the notch on the appliance and push the filter into the hole carefully.
  • To reset the filter life indicator, hold the reset button for three seconds. When the PPC light flashes, press the reset button to select which filter you would like to reset (PPC filter or RO filter).
  • Hold the reset button for three seconds. The life of the PPC filter and the RO filter can be reset in the same way.
  • Close the RO system cover.
  • Open the feed water adapter and then turn on the RO faucet.
  • Keep the RO system running for approximately 30 minutes to complete the flashing process.
  • After 30 minutes, turn off the power and then turn it on again. The system will be reset and can be used normally.

Troubleshooting and Customer Support

If you encounter any problems during installation or use, do not hesitate to contact the Icepear customer support team. They are dedicated to ensuring your satisfaction and will assist you with any issues you may have. Icepear offers a one-year return policy guarantee and a product lifetime warranty on every filter confirmed with defects in material and workmanship within each filter's service life. Customer support is readily available to address any questions or concerns you may have.

Benefits of the Ice Pure UTR 400A Reverse Osmosis Filtration System

The Ice Pure UTR 400A reverse osmosis filtration system offers numerous benefits for your household. Here are some of the key advantages:

  • Removes impurities, contaminants, and heavy metals from tap water, providing clean and great-tasting water for drinking, cooking, and other household needs.
  • User-friendly installation process with clear instructions and included accessories.
  • Real-time water quality display on the smart faucet ensures you are drinking healthy and pure water every time.
  • Indicator lights and displays for easy monitoring of filter life and system status.
  • Quick and effortless filter replacement with one-touch technology.
  • High-grade waterproof and anti-leakage features ensure household safety.
  • Durable construction and product lifetime warranty for long-term peace of mind.

With the Ice Pure UTR 400A reverse osmosis filtration system, you can enjoy the benefits of pure and filtered water in your home.

FAQ

Q: What is reverse osmosis filtration? Reverse osmosis filtration is a process that uses a semipermeable membrane to remove impurities, contaminants, and particles from water. It works by applying pressure to the water, forcing it through the membrane and leaving behind the impurities. This process provides a high level of purification and produces clean, great-tasting water.

Q: How often should I replace the filters in the Ice Pure UTR 400A system? The PPC filter and RO filter in the Ice Pure UTR 400A system should be replaced as indicated by the filter life indicator. When the indicator light flashes red and white alternately, it is an indication that the filters are near their expiration date. When the indicator light remains red and beeps continuously, it means the filters have expired and should be replaced.

Q: Can I install the Ice Pure UTR 400A system myself, or do I need professional help? The Ice Pure UTR 400A system is designed for easy installation, and you can install it yourself by following the step-by-step instructions provided. However, if you are not comfortable with DIY installations or have any concerns, it is recommended to seek professional help to ensure proper installation and optimal performance of the system.

Q: Does the Ice Pure UTR 400A system remove fluoride from the water? Yes, the Ice Pure UTR 400A system is equipped with advanced filtration technology that removes a wide range of impurities, including fluoride, from the water. It ensures that you receive clean and purified water, free from various contaminants.

Q: How long does the Ice Pure UTR 400A filter last? The lifespan of the filters in the Ice Pure UTR 400A system can vary depending on the water quality and usage. However, on average, the filters need to be replaced approximately every 6 to 12 months. It is important to monitor the filter life indicator and replace the filters when indicated to maintain optimal filtration performance.

Q: Is the Ice Pure UTR 400A system suitable for well water? Yes, the Ice Pure UTR 400A system is designed to handle a wide range of water sources, including well water. Its advanced filtration technology effectively removes impurities, contaminants, and particles commonly found in well water, providing you with clean and purified water.

Q: Can the Ice Pure UTR 400A system be used for commercial purposes? While the Ice Pure UTR 400A system is primarily designed for residential use, it can also be used for small-scale commercial applications. It is important to assess the specific needs and volume of water required for your commercial establishment to ensure the system meets the demands effectively.

Q: What is the warranty period for the Ice Pure UTR 400A system? Icepear provides a product lifetime warranty on every filter confirmed with defects in material and workmanship within each filter's service life. This warranty provides assurance of the system's quality and protects against any manufacturing or performance issues.

Q: Can I connect the Ice Pure UTR 400A system to my refrigerator for filtered water and ice? Yes, it is possible to connect the Ice Pure UTR 400A system to your refrigerator for filtered water and ice. You can use the pure water tubing and appropriate connectors to establish the connection. However, it is recommended to consult the refrigerator's manufacturer or a professional plumber for specific instructions and compatibility.

Q: How often should I clean the Ice Pure UTR 400A system? Regular cleaning and maintenance of the Ice Pure UTR 400A system are essential to ensure optimal performance and longevity. It is recommended to clean the system at least once every six months. Follow the manufacturer's instructions for cleaning, which may involve using a mild cleanser and sterilizing the components.

Most people like

Find AI tools in Toolify

Join TOOLIFY to find the ai tools

Get started

Sign Up
App rating
4.9
AI Tools
20k+
Trusted Users
5000+
No complicated
No difficulty
Free forever
Browse More Content