Fix your Google Pixel 6 Pro screen with ease

Fix your Google Pixel 6 Pro screen with ease

Table of Contents

1. Introduction
2. Preparing for the Screen Replacement
   1. Tools Needed
   2. Safety Precautions
3. Heating the Device
   1. Using a Hot Plate
   2. Recommended Temperature
4. Removing the Old Screen
   1. Separating the Screen from the Device
   2. Preserving the Fingerprint Sensor
5. Disconnecting the Screen Flex Cable
   1. Removing the Retaining Screw
   2. Disconnecting the Flex Cable
6. Removing the Fingerprint Sensor
   1. Softening the Double-sided Tape
   2. Separating the Sensor from the Screen
7. Installing the New Screen
   1. Aligning the Fingerprint Sensor
   2. Reconnecting the Flex Cable
8. Testing and Calibration
   1. Checking the Screen Functionality
   2. Troubleshooting the Fingerprint Sensor
9. Cleaning and Sealing
   1. Preparing the Device Before Installation
   2. Applying Double-sided Tape or B7000 Glue
10. Final Assembly and Inspection
    1. sealing the Device
    2. Post-replacement Inspection and Testing
11. Conclusion

How to Replace the Screen on a Google Pixel 6/Pro: A Step-by-Step Guide

The Google Pixel 6/Pro is a high-end smartphone known for its impressive features, but accidents happen, and sometimes the screen may get damaged. If You find yourself in a situation where you need to replace your Google Pixel 6/Pro screen, this guide will walk you through the process step by step.

Preparing for the Screen Replacement

Before you start the screen replacement process, there are a few things you need to do to ensure a smooth and successful repair.

Tools Needed

To replace the screen on your Google Pixel 6/Pro, you will need the following tools:

• Heat gun or hot plate
• Guitar pick or plastic pry tool
• Screwdriver
• Tweezers (optional)
• B7000 glue or double-sided tape

Ensure that you have all the necessary tools readily available before you begin the repair to avoid any interruptions.

Safety Precautions

When working with electronic devices, it's important to prioritize safety. Here are a few precautions to keep in mind:

• Power off the device and remove any connected cables or accessories.
• Work in a clean and well-lit area to prevent losing small components.
• Use proper anti-static measures, such as an anti-static mat and wrist strap, to avoid damaging the internal components.
• Handle the device with care to prevent further damage.

By following these safety measures, you can minimize the risk of accidents and protect both yourself and your device.

Heating the Device

Before you can remove the old screen, you'll need to heat the device to soften the adhesive holding it in place.

Using a Hot Plate

Instead of using a heat gun, it is recommended to use a hot plate for this screen replacement. Here's how you can do it:

1. Place the Google Pixel 6/Pro on a hot plate and set the temperature to around 80 degrees Celsius.
2. Let the device warm up for approximately 8 to 10 minutes to ensure the adhesive becomes pliable.

Heating the device using a hot plate provides consistent and controlled heat distribution, reducing the risk of overheating or causing damage.

Removing the Old Screen

Once the device is heated to the right temperature, you can start removing the old screen.

Separating the Screen from the Device

To separate the screen from the body of the device, follow these steps:

1. Insert a guitar pick or plastic pry tool at the bottom of the device, between the screen and the body.
2. Gently Apply pressure and slide the pick along one side of the screen to separate it from the device.
3. Repeat the process on the other side to fully detach the screen from the device.

Take your time and be cautious during this process to avoid damaging any other components.

Preserving the Fingerprint Sensor

The fingerprint sensor is an essential component on your Google Pixel 6/Pro. To preserve it during the screen replacement, follow these steps:

1. Using a heat gun or hot plate, carefully heat the area around the fingerprint sensor.
2. Once the adhesive is softened, use a flat-edged tool to separate the fingerprint sensor from the screen.
3. Slowly and gently detach the sensor, being careful not to apply too much force or damage it.

By taking these precautions, you can ensure that the fingerprint sensor remains intact and functional.

Disconnecting the Screen Flex Cable

Before fully removing the old screen, you'll need to disconnect the screen flex cable from the body of the device.

Removing the Retaining Screw

Locate the screw holding the screen flex cable in place and remove it using a screwdriver. This will allow you to disconnect the cable more easily.

Disconnecting the Flex Cable

To disconnect the screen flex cable, follow these steps:

1. Hold the screen and flex cable together.
2. Gently pull them away from the body of the device to detach them simultaneously.

Removing the screen flex cable properly ensures a smooth transition to the new screen.

Removing the Fingerprint Sensor

Once the old screen and flex cable are detached, you can remove the fingerprint sensor from the old screen and prepare it for installation on the new screen.

Softening the Double-sided Tape

To make the removal process easier, you'll need to soften the double-sided tape holding the fingerprint sensor in place:

1. Heat the front of the device using a heat gun or hot plate.
2. Apply gentle pressure on the screen while using a flat-edged tool to separate the fingerprint sensor from the adhesive.

By softening the tape, you can minimize the risk of damage during the removal process.

Separating the Sensor from the Screen

To remove the fingerprint sensor from the old screen, use a flat-edged tool to carefully separate it from the adhesive:

1. Insert the tool at the edge of the sensor and gently lift it away from the screen.
2. Slowly and steadily work your way around the sensor, applying slight pressure to separate it from the adhesive.

Take your time and exercise caution to prevent any damage to the fingerprint sensor.

Installing the New Screen

With the old screen and fingerprint sensor removed, it's time to install the new screen on your Google Pixel 6/Pro.

Aligning the Fingerprint Sensor

Before attaching the new screen, make sure to Align the fingerprint sensor correctly:

1. Identify the square on the new screen that aligns with the fingerprint sensor.
2. Ensure that the fingerprint sensor sits perfectly within this square to avoid any misreadings.

Proper alignment is crucial for the fingerprint sensor to function effectively.

Reconnecting the Flex Cable

To connect the screen flex cable to the motherboard, perform the following steps:

1. Align the flex cable with its corresponding connector on the motherboard.
2. Gently press the flex cable into place until it is securely connected.
3. Attach the retaining plate and screw to further secure the flex cable.

Ensuring a secure connection between the flex cable and the motherboard is essential for proper screen functionality.

Testing and Calibration

After installing the new screen, it's important to test its functionality and calibrate the fingerprint sensor if necessary.

Checking the Screen Functionality

Before sealing the device, follow these steps to test the new screen:

1. Reconnect the flex cable of the screen to the motherboard.
2. Apply gentle pressure to ensure the connection is secure.
3. Power on the device and check if the screen responds normally.
4. Access the fingerprint sensor settings and register your fingerprints to test its functionality.

If everything works smoothly, you can proceed to the final steps. If there are any issues with the screen or fingerprint sensor, troubleshooting may be required.

Troubleshooting the Fingerprint Sensor

If the fingerprint sensor does not work immediately after the screen replacement, try the following troubleshooting steps:

1. Access the fingerprint sensor settings on your Google Pixel 6/Pro.
2. Re-register your fingerprints to establish a new connection between the sensor and the motherboard.
3. If that doesn't resolve the issue, consider recalibrating the fingerprint sensor or syncing it with the motherboard software.
4. If all else fails, there may be a problem with the fingerprint sensor itself, and a replacement may be necessary.

By following these steps, you can troubleshoot and resolve any issues related to the fingerprint sensor.

Cleaning and Sealing

Before the final assembly, it's essential to clean the body of the device and prepare it for the new screen.

Preparing the Device Before Installation

To ensure a clean and secure fit, follow these steps:

1. Remove any old glue or double-sided tape from the device's body.
2. Use compressed air or a soft brush to remove any Dust or debris from the device's surface.

A clean surface will provide optimal adhesion for the new screen.

Applying Double-sided Tape or B7000 Glue

If your new screen does not come with pre-applied double-sided tape, you'll need to apply it to ensure a secure attachment. Alternatively, you can use B7000 glue, an electronic repair adhesive.

1. Apply the double-sided tape or B7000 glue around the edges of the screen or the body of the device.
2. Ensure the tape or glue is evenly distributed and covers the entire perimeter.

Be quick when applying B7000 glue, as it tends to solidify rapidly. Double-sided tape provides a more convenient and reliable option.

Final Assembly and Inspection

With the preparations completed, you're ready to assemble and inspect your Google Pixel 6/Pro.

Sealing the Device

Place the new screen on the device and apply gentle pressure to seal it completely. If you used B7000 glue, leave the device under a press or weight for approximately 10 minutes to allow the adhesive to set properly.

Post-replacement Inspection and Testing

After the sealing process, remove the device from the press and perform a thorough inspection:

• Check for any gaps or unevenness in the screen's alignment.
• Verify that all buttons and ports are functioning correctly.
• Test the screen responsiveness and the fingerprint sensor's accuracy.

If all tests pass and the device is working correctly, congratulations! You have successfully replaced the screen on your Google Pixel 6/Pro.

Conclusion

Replacing the screen on a Google Pixel 6/Pro may seem daunting, but with the right tools, precautions, and step-by-step guidance, it can be accomplished successfully. By following this comprehensive guide, you can save both time and money by performing the screen replacement yourself. Remember to proceed with caution, take your time, and prioritize safety throughout the entire process. With a brand new screen, your Google Pixel 6/Pro will be ready to serve you once again.