Learn How to Wire Wrap a Double Cabochon Pendant

Table of Contents:

1. Introduction
2. Materials Required
3. Step 1: Wrapping the Wires Around the Stones
4. Step 2: Creating the Connection Part
5. Step 3: Forming the Bail
6. Step 4: Adding Decorative Details
7. Step 5: Final Touches and Finishing the Pendant
8. Conclusion

How to Make a Two Stone Pendant: A Step-by-Step Guide

In this article, I will guide You through the process of making a stunning two stone pendant. This pendant features two beautiful cabochon stones, one larger than the other, wrapped in a soft copper wire frame. With a few simple techniques and some basic materials, you can Create your own unique pendant that showcases your personal style. So, let's dive in and get started!

Step 1: Wrapping the Wires Around the Stones

To begin, Gather your materials. You will need two cabochon stones, one larger and one smaller, along with 20 gauge square soft copper wire. Cut three pieces of wire, each measuring 14 inches long. Start by taking half round wire, which is 22 gauge, and wrap it flat side down around the three square wires at the center. Use pliers to flatten the wire to secure it in place. Trim the ends and flatten them down. The side with the ends should be the side that will touch the stone. Start bending the wires in one direction and place your larger stone on a flat surface. Wrap the wires around the stone, creating a secure hold.

Step 2: Creating the Connection Part

Take the half round wire again and wrap it several times around one of the back wires, starting a couple of inches in. Bring it through the middle, making sure the flat side is down and the round side is up. Trim the wire, tucking in the little end. Repeat the process on the other side. Separate the three wires coming down and wrap the half round wire around one of the back wires to prevent unraveling.

Step 3: Forming the Bail

Now, it's time to create the bail. Take the first two wires on each side and wrap them around the back wires. Continue wrapping around all four wires to form the bail. Wrap until it is tall enough, then cut and pinch the end. Use round nose pliers to Shape the bail into a desired shape. Connect the bail by wrapping a little wire around it and trim the excess.

Step 4: Adding Decorative Details

At this stage, you can add decorative details to your pendant using the remaining wires. Bring the wires to the back and have them cascade downward. Create loops or swirls as desired, trimming and tucking the ends away under the bail.

Step 5: Final Touches and Finishing the Pendant

Ensure that the stones are securely held in the wire frame. If necessary, adjust the wires to prevent the stones from popping out. Trim any excess wire and tuck it away under the bail. Check the pendant from all angles to ensure a finished and polished look.

In conclusion, creating a two stone pendant is a rewarding and creative process. By following these steps, you can craft a beautiful piece of jewelry that showcases your personal style and creativity. So, gather your materials and dive into the world of wire-wrapping to create your own stunning pendant. Enjoy the process and create something truly unique!