Learn to Make a Stylish Bee Craft Tote Bag

Learn to Make a Stylish Bee Craft Tote Bag

Table of Contents:

  1. Introduction
  2. Crafting a Tote Bag: Part 2
    1. Working on the Pockets
    2. Gluing the Side Pockets
    3. Adding the Mechanism for the Pocket
    4. Closing the Back Pocket
    5. Adding the Design to the Front Pockets
    6. Gluing the Accordion Sides of the Pockets
    7. Final Touches and Finishing Up

Crafting a Tote Bag: Part 2

In this article, we will Continue our Journey of crafting a tote bag. We left off with working on the pockets, and now we will proceed with the remaining steps. This part of the process involves gluing the side pockets, adding the mechanism for the pocket, closing the back pocket, and adding the design to the front pockets. So, let's dive right in and get started!

1. Working on the Pockets

Before we begin, make sure that your pockets are in the correct position, with all the accordion folds in place. The pockets should be open and ready to be glued down.

2. Gluing the Side Pockets

The side pockets do not have a closure, so we can go ahead and glue them down. Take a small amount of glue and Apply it to the sides of the pockets. Press the sides down firmly to secure them in place. You can either use your fingers to hold them down or use a burnishing tool to ensure they stay put.

3. Adding the Mechanism for the Pocket

Now, let's focus on the pocket in the back. Before closing it, we need to add a mechanism that will allow the pocket to slide open and closed. Take a brad or a similar fastening tool and insert it into the pocket. You may need to add some foam tape to provide enough space for the pocket to slide freely. Carefully fold the prongs of the brad inward, ensuring they are securely attached to the pocket.

4. Closing the Back Pocket

With the mechanism in place, it's time to close the back pocket. Fold the pocket accordion-style and glue it down. Press the folded sections together to ensure they are firmly attached. Take extra care not to get any glue on the mechanism or the prongs of the brad.

5. Adding the Design to the Front Pockets

To add a decorative element to the front pockets, cut out pieces of your chosen designer paper. Glue these pieces onto the corresponding sections of your black base layer. This way, when you slide the pockets open and closed, only the designer paper will be visible. Ensure that the design aligns with the opening of each pocket for a clean and Cohesive look.

6. Gluing the Accordion Sides of the Pockets

Apply glue to the accordion folds on both sides of the pockets. Carefully fold the pockets and press them down, ensuring they are securely glued. Use your fingers or a burnishing tool to reinforce the adhesive and prevent the pockets from coming undone.

7. Final Touches and Finishing Up

With all the pockets assembled, it's time for the final touches. Glue the top flap of each pocket in place, making sure they Align with the pocket openings. If you're using a closure tab, secure it to the tote bag using glue or by attaching it to the back wall. Apply pressure to the pockets to ensure they are securely glued down.

Congratulations! You have successfully completed the Second part of crafting your tote bag. Take a moment to admire your creation and enjoy the functionality of the accordion pockets. Don't forget to go back and make any necessary adjustments or repairs. Thank you for following along with this tutorial, and happy crafting!

Highlights:

  • Learn how to Create functional accordion pockets for a tote bag.
  • Discover the step-by-step process of gluing the side pockets.
  • Add a mechanism for the pocket and ensure smooth sliding.
  • Close the back pocket and add a decorative design to the front pockets.
  • Glue the accordion sides of the pockets for extra stability.
  • Complete the tote bag by adding the final touches and securing the pockets in place.

FAQ:

Q: Can I use a sticker or alternative embellishment instead of a brad? A: Yes, you can use a sticker or any other embellishment that allows for easy sliding and closure of the pockets. Just make sure it is securely attached.

Q: What if I don't have foam tape for the mechanism? A: If you don't have foam tape, you can try using other materials like double-sided adhesive or cardstock to create enough space for the pocket to slide.

Q: Can I use different Patterns or colors for the designer paper? A: Absolutely! Feel free to get creative and mix and match different patterns or colors of designer paper to personalize your tote bag.

Q: How can I ensure the pockets stay securely glued? A: Apply ample glue to all the necessary areas and use a burnishing tool or your fingers to firmly press and reinforce the adhesive. If needed, consider using additional adhesive reinforcements like hot glue for extra security.

Most people like

Find AI tools in Toolify

Join TOOLIFY to find the ai tools

Get started

Sign Up
App rating
4.9
AI Tools
20k+
Trusted Users
5000+
No complicated
No difficulty
Free forever
Browse More Content