Master the Art of Fused Clapton Coils!

Master the Art of Fused Clapton Coils!

Table of Contents

1. Introduction
2. What is a Fused Clapton?
3. Shoutouts to the Creators
4. Benefits of Fused Clapton Coils
5. Tools Needed for the Build
6. Step-by-Step Guide to Building a Fused Clapton Coil a. Straightening the Nichrome Wire b. Twisting the Nichrome Wire c. Wrapping the Kanthal Wire d. Installing the Coil in an RDA
7. Performance and Flavor
8. Pros and Cons of Fused Clapton Coils
9. Summary
10. Conclusion

Building Your Own Fused Clapton Coil: A Review and Tutorial

Introduction

Are You ready to take your vaping experience to the next level? If so, then you're in luck because today we will be delving into the world of fused Clapton coils. This review and tutorial will guide you through the process of building your very own fused Clapton coil, explaining the steps in Detail to ensure a successful build. Whether you're a coil building enthusiast or simply curious about the benefits of using a fused Clapton coil, this article has got you covered.

What is a Fused Clapton?

Before we dive into the nitty-gritty of building a fused Clapton coil, let's start by understanding what it actually is. A fused Clapton coil is a Type of coil build that consists of a Parallel Core wire that has been wrapped with a thinner wire. The parallel core wire provides stability and conductivity, while the outer wrapped wire enhances flavor and vapor production. The combination of these two wires creates a unique coil structure that has gained popularity among vapers for its exceptional performance.

Shoutouts to the Creators

Before we proceed, I want to give credit where credit is due. The fused Clapton coil design was created by Derek Small, a true innovator in the world of coil building. Additionally, I'd like to acknowledge the contributions of two other talented coil builders, Twisted Messes and Squid Dude, who played a significant role in popularizing the fused Clapton coil. These individuals deserve recognition for their expertise and tireless effort in pushing the boundaries of coil building.

Benefits of Fused Clapton Coils

Now that you have a basic understanding of what a fused Clapton coil is, let's take a look at some of the advantages it offers. One of the most notable benefits is the increased surface area due to the intricate coil structure. The additional surface area allows for more e-liquid to come into contact with the coil, resulting in enhanced flavor production. Furthermore, the combination of the parallel core wire and the outer wrapped wire creates a coil that heats up quickly and evenly, providing a consistent vaping experience. Additionally, the fused Clapton coil has excellent wicking capabilities, allowing for efficient e-liquid absorption and minimizing the risk of dry hits.

Tools Needed for the Build

Before we get started with the build, it's important to Gather all the necessary tools. For building a fused Clapton coil, you will need the following:

1. 24 gauge Nichrome 80 wire (approximately one foot in length)
2. 34 gauge Kanthal A1 wire (approximately 15 feet in length)
3. Toothless pliers
4. Wire cutters
5. Screwdriver (1/8 inch size)
6. Hitachi drill bit (optional)

These tools will ensure a smooth and hassle-free building process, so make sure you have everything ready before proceeding.

Step-by-Step Guide to Building a Fused Clapton Coil

Now that you have all the necessary tools, let's dive into the step-by-step process of building a fused Clapton coil. Follow these instructions carefully to achieve the best results:

a. Straightening the Nichrome Wire: Cut two pieces of the 24 gauge Nichrome 80 wire, each about a foot in length. Use the toothless pliers to grip one end of the wire and spin the drill in a clockwise direction, pulling the slack out as you go. Repeat this process with the other piece of wire until both are completely straightened.

b. Twisting the Nichrome Wire: Hold one end of the two pieces of Nichrome 80 wire together and twist them manually at one end. Insert the twisted end into the drill chuck and tighten it. Proceed to twist the wire using the drill in a clockwise direction, ensuring that the two wires remain parallel to each other. This process will Create the core wire for the fused Clapton coil.

c. Wrapping the Kanthal Wire: Cut approximately 15 feet of the 34 gauge Kanthal A1 wire. Fold one side of the wire and clamp it between the teeth of the toothless pliers to secure it in place. Start spinning the drill in a clockwise direction while holding the Kanthal wire between your thumb and index finger. Apply just enough pressure to maintain control over the wire as it wraps around the core wire. Make sure the wraps are as close together as possible, adjusting the tension as needed. Continue wrapping until you achieve the desired length.

d. Installing the Coil in an RDA: Once the fused Clapton coil is wrapped, remove it from the drill chuck. Use the screwdriver to carefully slide the coil off the drill bit. Install the coil in an RDA of your choice, making sure it is positioned correctly and centered. Tighten the screws to secure the coil in place. Trim any excess wire and check for any hot spots. Finally, wick the coil with your preferred cotton and saturate it with e-liquid.

Performance and Flavor

Now that your fused Clapton coil is installed and ready to go, let's discuss its performance and flavor production. One of the standout features of the fused Clapton coil is its ability to hold a significant amount of e-liquid, resulting in intense flavor delivery. The combination of the increased surface area and efficient wicking allows for a flavorful and satisfying vape. Additionally, the ramp-up time of the fused Clapton coil is rapid, thanks to the parallel core wire. This means that you can enjoy a quick and consistent vaping experience.

Pros and Cons of Fused Clapton Coils

To provide a comprehensive overview, let's examine the pros and cons of using fused Clapton coils:

Pros:

• Enhanced flavor production
• Increased vapor production
• Rapid ramp-up time
• Efficient wicking capabilities
• Aesthetically pleasing design

Cons:

• Time-consuming build process
• High e-liquid consumption
• Requires patience and precision

Summary

In summary, building and using a fused Clapton coil can take your vaping experience to new heights. The combination of parallel core wire and outer wrapped wire offers a myriad of benefits, including enhanced flavor, increased vapor production, and efficient wicking. Although the build process may require some patience and precision, the results are well worth the effort. If you're looking to elevate your vaping game, give a fused Clapton coil a try.

Conclusion

In conclusion, the fused Clapton coil is a game-changer in the world of coil building. Its unique design and exceptional performance make it a favorite among vapers seeking intense flavor and impressive vapor production. While the build process may be time-consuming and intricate, the end result is a coil that will take your vaping experience to new heights. So, why not give it a try and see the difference for yourself? Happy vaping!

Highlights:

• Learn how to build a fused Clapton coil for enhanced flavor and vapor production.
• Discover the benefits of using a fused Clapton coil in your vaping setup.
• Step-by-step guide with detailed instructions and tips.
• Understand the pros and cons of fused Clapton coils.
• Elevate your vaping experience with the unique design and superior performance of a fused Clapton coil.

FAQ

Q: What makes a fused Clapton coil different from other coil builds? A: The fused Clapton coil consists of a parallel core wire that has been wrapped with a thinner wire, providing increased surface area for enhanced flavor and vapor production.

Q: Do fused Clapton coils require special tools or expertise to build? A: Building a fused Clapton coil does require some specialized tools and patience. However, with practice and attention to detail, anyone can successfully build a fused Clapton coil.

Q: How does a fused Clapton coil compare to other coil designs in terms of performance? A: Fused Clapton coils offer improved flavor and vapor production due to their intricate design and efficient wicking capabilities. They provide a consistent and satisfying vaping experience.

Q: How often do I need to replace a fused Clapton coil? A: The lifespan of a fused Clapton coil depends on various factors, including usage and maintenance. Generally, it is recommended to replace the coil when the flavor diminishes or when the coil becomes gunked up.

Q: Can I use a fused Clapton coil in any type of atomizer? A: Fused Clapton coils can be used in a wide range of atomizers, including RDAs, RTAs, and sub-ohm tanks. However, it's important to ensure that the atomizer can accommodate the size of the coil.