Master the Ropes in Poly Bridge 2!
Table of Contents
- Introduction
- Beating the Challenge Levels Using Only Ropes
- Level 1: Building a Rope Truss
- Level 2: Reinforcing the Dangling Road
- Level 3: Using Ropes to Hold Back the Truck
- Level 4: Creating Elevation for the Cars
- Exploring Different Solutions
- Level 5: Using Ropes and Roads for Support
- Level 6: Creating a Short Span of Support
- Overcoming Difficult Bridge Designs
- Level 7: Building a Bridge With a Steep Slope
- Level 8: Using Rocks and Hot Air Balloons
- Level 9: Selectively Choosing Support Points
- Level 10: Designing a Bridge for the Limo
- Challenging Levels and Innovative Solutions
- Level 11: Hydraulics and Ropes
- Level 12: Overcoming the Land Brace
- Level 13: Revisiting Previously Troublesome Levels
- Conclusion
Beating the Challenge Levels Using Only Ropes
In the game Poly Bridge 2, some levels present unique challenges that require ingenious bridge designs. One such challenge is beating the levels using only ropes for support. This means that the bridges must rely entirely on tension and ropes, without relying on compression or other structural elements. In this article, we will explore the strategies and solutions for beating these challenge levels using only ropes.
Level 1: Building a Rope Truss
The first level in the challenge series requires building a rope truss. However, a truss that relies on compression does not work with ropes, as they cannot go under any compression. Instead, a dangling road can be used to beat this level. Although it may not be as easy as using a truss, it still accomplishes the task successfully.
Level 2: Reinforcing the Dangling Road
As the levels progress, the difficulty increases. In level 2, the truck approaching the road ends up breaking it immediately. To reinforce the dangling road, ropes need to be attached to every node. This provides the necessary rigidity to hold the truck, although some adjustments may be required to ensure a smooth passage.
Level 3: Using Ropes to Hold Back the Truck
The difficulty ramp in the challenge series becomes severe, and level 3 proves to be extremely hard. Using ropes to hold back the truck from pushing them into the Water becomes a viable strategy. Although the truck may flip over initially, it can be fine-tuned to achieve the desired outcome.
Level 4: Creating Elevation for the Cars
One of the interesting levels is level 4, where two cars need to cross a gap. The car on top needs to gain elevation. Initially, the challenge level makes it seemingly impossible with nodes missing on the top platform. However, by first working on the bottom car and then improvising solutions, it becomes possible to beat the level.
Exploring Different Solutions
As the challenge levels progress, new obstacles and requirements arise. This section explores various solutions to overcome these challenges using ropes and other elements.
Level 5: Using Ropes and Roads for Support
Level 5 presents a long span of support, making it difficult to use only ropes. However, by strategically using ropes and roads for support, it is possible to tackle this level. Adjustments and fine-tuning may be necessary to ensure the stability of the bridge.
Level 6: Creating a Short Span of Support
In level 6, the goal is to get a light vehicle, such as a Vespa, across a long span. By designing a shorter ramp and using ropes and roads for support, the level becomes more manageable. Iterative adjustments and reinforcing can lead to a successful outcome.
Overcoming Difficult Bridge Designs
Some bridge designs require unique approaches to overcome the challenges presented. This section explores levels that pose significant difficulties and the innovative solutions to conquer them.
Level 7: Building a Bridge With a Steep Slope
Level 7 presents a bridge design with a steep slope, creating difficulty in maintaining stability. By using reinforced roads and ropes for support, the bridge can be designed to overcome the challenge. Iterative adjustments and fine-tuning are crucial to achieving a successful outcome.
Level 8: Using Rocks and Hot Air Balloons
Level 8 introduces the use of rocks and hot air balloons as additional components to the bridge design. By creatively incorporating these elements and utilizing ropes for support, the level can be conquered effectively. Careful positioning and reinforcement strategies are essential for success.
Level 9: Selectively Choosing Support Points
Level 9 poses a unique challenge of using ropes selectively due to limited budget constraints. Careful consideration of which support points to use ropes on becomes crucial, as using ropes on every single piece is not feasible within the budget. Adjustments, fine-tuning, and innovative thinking are required to overcome this obstacle.
Level 10: Designing a Bridge for the Limo
To overcome level 10, a bridge design capable of supporting a limousine is necessary. Challenges arise due to the weight of the vehicle and restricted budget. By improvising and fine-tuning the bridge design, it becomes possible to cross the bridge successfully while adhering to the budget limitations.
Challenging Levels and Innovative Solutions
This section revisits previously challenging levels and explores further innovative solutions.
Level 11: Hydraulics and Ropes
Level 11 introduces the use of hydraulics in combination with ropes to Create dynamic bridge designs. By strategically designing the bridge and utilizing both elements effectively, it becomes possible to conquer this level.
Level 12: Overcoming the Land Brace
Level 12, known as "Land Brace," has proven to be a challenging level in the past. By reevaluating the bridge design and finding alternative solutions, it becomes possible to overcome this obstacle while using a limited number of roads and ropes.
Level 13: Revisiting Previously Troublesome Levels
This section revisits two levels that posed significant difficulties earlier in the challenge series. By applying the knowledge gained from progressing through the challenges, it becomes possible to find new strategies and solutions to beat these levels successfully.
Conclusion
Beating the challenge levels in Poly Bridge 2 using only ropes requires innovative thinking, fine-tuning, and a deep understanding of bridge dynamics. By strategically utilizing ropes and other components, it becomes possible to overcome even the most difficult levels. Constant experimentation and perseverance are key to achieving success in this unique bridge-building game.
