Optimizing Reolink Cameras for Blue Iris

Optimizing Reolink Cameras for Blue Iris

Table of Contents

1. Introduction
2. Updating Reolink Cameras
   • Checking Firmware Updates
   • Installing Firmware Updates
   • Camera Configuration Settings
3. Configuring Blue Iris
   • Adding a New Camera
   • Setting up Motion Detection
   • Adjusting Recording Settings
4. Optimizing Reolink Cameras for Blue Iris
   • Hardware Acceleration
   • Adjusting Frame Rates
   • Troubleshooting Night-time Smearing Issues
5. Comparing Reolink Cameras to Higher-end Brands
6. Troubleshooting Common Issues
   • RTMP vs RTSP Stream
   • Compatibility with Older Reolink Camera Models
7. Conclusion

How to Make Reolink 8 Megapixel Cameras Work with Blue Iris

Are You experiencing compatibility issues between your Reolink 8 megapixel cameras and Blue Iris? In the past, these cameras have not been known to work seamlessly with Blue Iris. However, recent updates to both Blue Iris and Reolink firmware have resolved these problems. In this article, we will guide you through the steps to ensure that your Reolink 8 megapixel cameras work flawlessly with ONVIF network video recorders like Blue Iris.

Introduction

Introducing the topic and the challenges faced when trying to use Reolink 8 megapixel cameras with Blue Iris.

Updating Reolink Cameras

Checking Firmware Updates

Explaining the importance of updating the firmware in Reolink cameras and guiding users to the reolink.com download center.

Installing Firmware Updates

Step-by-step instructions on how to download and install the latest firmware for Reolink cameras, including the necessary updates for Blue Iris compatibility.

Camera Configuration Settings

Demonstrating the necessary configuration settings in Reolink cameras after the firmware update, such as enabling fixed frame rate and adjusting frame rates for both main and substreams.

Configuring Blue Iris

Adding a New Camera

Guiding users on how to add a new camera in Blue Iris while bypassing the brand selection dropdown, using the camera's IP address and login credentials instead.

Setting up Motion Detection

Instructions on setting up motion detection and AI object detection in Blue Iris, ensuring that users can take full AdVantage of the camera's capabilities.

Adjusting Recording Settings

Exploring the options to configure direct-to-disk recording, allowing users to optimize the recording settings according to their preferences.

Optimizing Reolink Cameras for Blue Iris

Hardware Acceleration

Highlighting the utilization of hardware acceleration in Reolink cameras, thus optimizing performance and ensuring smoother video playback.

Adjusting Frame Rates

Explaining the importance of adjusting frame rates in Reolink cameras for both day and night conditions, and providing recommended settings for optimal results.

Troubleshooting Night-time Smearing Issues

Addressing the common issue of night-time smearing in 8 megapixel Reolink cameras and suggesting possible solutions within Blue Iris.

Comparing Reolink Cameras to Higher-end Brands

Drawing a comparison between Reolink cameras and more expensive brands, showcasing their performance and value for money.

Troubleshooting Common Issues

RTMP vs RTSP Stream

Discussing the differences between RTMP and RTSP streaming options for Reolink cameras in Blue Iris, and guiding users on when to use each.

Compatibility with Older Reolink Camera Models

Addressing compatibility limitations with older Reolink camera models that haven't received the necessary firmware updates, and explaining alternative solutions for optimal performance.

Conclusion

Summarizing the steps and recommendations for making Reolink 8 megapixel cameras work seamlessly with Blue Iris, and encouraging users to leave any comments or issues they might encounter for further assistance.

Highlights:

• Recent updates to Blue Iris and Reolink firmware have resolved compatibility issues between Reolink 8 megapixel cameras and Blue Iris.
• Updating the firmware of Reolink cameras is crucial for optimal performance with Blue Iris.
• Configuring the right settings, such as fixed frame rate, in Reolink cameras is essential after the firmware update.
• Blue Iris can be configured to work with Reolink cameras by directly entering the camera's IP address and login credentials.
• Optimizing Reolink cameras for Blue Iris includes adjusting frame rates and troubleshooting possible night-time smearing issues.
• Reolink cameras provide excellent performance and value for money compared to higher-end brands.
• Troubleshooting common issues like choosing between RTMP and RTSP streams and compatibility with older camera models is essential for a smoother experience.
• Following the steps outlined in this article will ensure a seamless integration between Reolink 8 megapixel cameras and Blue Iris.