Snowblower Impeller Kit Installation Tips: Must-Watch Video

Snowblower Impeller Kit Installation Tips: Must-Watch Video

Table of Contents:

Introduction

1. The Importance of Improving Throwing Distance in Two-Stage Snowblowers
2. The Overlooked Benefits of Adding an Impeller Kit
3. How an Impeller Kit Helps Plow Through Packed Snow
4. Avoiding the Snowblower from Bogging Down
5. Comparing Impeller Kit to Other Anti-Stick Solutions
6. The Longevity and Warranty Concerns
7. Installing an Impeller Kit on Different Snowblower Models
8. The Different Methods of Installing Impeller Kits
9. Step-by-Step Guide to Installing an Impeller Kit with Bolts
10. The Results and Performance of a Snowblower with an Impeller Kit
11. Maintenance and Care Tips for Snowblowers with Impeller Kits
12. Conclusion

Improving Throwing Distance with an Impeller Kit

During winter, using a snowblower is a necessity to clear paths, driveways, and walkways effectively. However, many snowblower owners struggle with their machines' throwing distance, especially when faced with heavy, wet, packed snow. Fortunately, there is a solution that can greatly enhance your throwing distance and make your snowblower truly unstoppable - the addition of an impeller kit. In this article, we will explore the benefits of adding an impeller kit to your two-stage snowblower and provide a step-by-step guide on how to install it.

1. The Importance of Improving Throwing Distance in Two-Stage Snowblowers

Throwing distance is a crucial factor in the performance of a snowblower. It determines how far the snow is ejected from the machine, allowing for efficient snow removal. With a greater throwing distance, You can clear larger areas without the need for multiple passes. This is especially useful when dealing with heavy, wet, and packed snow, which tends to accumulate and Create dense piles that are challenging to remove. By improving the throwing distance, you can tackle these challenging snow conditions effortlessly.

2. The Overlooked Benefits of Adding an Impeller Kit

While the primary goal of adding an impeller kit is to enhance the snowblower's throwing distance, there are several other benefits that often go overlooked. One major AdVantage is the snowblower's ability to plow through piles of heavy, wet, packed snow without bogging down. The impeller kit closes the gap between the impeller blade and the housing, effectively reducing the amount of snow getting caught around the outside. This results in a cleaner pass with each rotation, preventing clogging and increasing overall efficiency.

3. How an Impeller Kit Helps Plow Through Packed Snow

The impeller kit's design plays a crucial role in its ability to plow through packed snow. By closing the gap between the impeller blade and the housing, it prevents snow from getting caught and accumulating around the impeller. Additionally, the kit slightly extends the throwing arm, further improving the throwing distance. This means that even dense, heavy snow can be effortlessly thrown by the snowblower, allowing for efficient snow removal.

4. Avoiding the Snowblower from Bogging Down

One common issue faced by snowblower owners is the machine's tendency to bog down when encountering heavy, wet snow. This can be frustrating and often requires frequent stops to clear the clogged snow, significantly slowing down the snow removal process. However, with the addition of an impeller kit, the gap between the impeller blade and the housing is reduced to 1/16 of an inch. This minimal gap ensures that the snowblower does not clog, even when faced with the heaviest of snowfall.

5. Comparing Impeller Kit to Other Anti-Stick Solutions

While there are various anti-stick solutions available, such as cooking spray, ceramic coatings, or silicone, adding an impeller kit surpasses them all in terms of effectiveness. While these temporary solutions may help reduce snow sticking temporarily, they need to be reapplied frequently. On the other HAND, an impeller kit provides a long-lasting solution by closing off the gap between the impeller blade and the housing permanently. This results in a consistently clean pass with each rotation, without the need for additional treatments.

6. The Longevity and Warranty Concerns

Some snowblower owners may have concerns about the longevity of their machines and the impact of adding an impeller kit on their warranty. However, it's important to note that an impeller kit does not cause excessive wear on the shaft bearings, as stated in the instructions. In fact, it can even increase the snowblower's surface life by preventing clogging and reducing strain on the machine. As for the warranty, the installation of an impeller kit is a common modification that many snowblower owners have performed without any issues.

7. Installing an Impeller Kit on Different Snowblower Models

Installing an impeller kit is a relatively straightforward process that can be done on various snowblower models. While the specific steps may vary slightly between models, the concept remains the same. By following a few simple instructions and using the provided tools, you can easily upgrade your snowblower's performance. Whether you have a popular brand or a vintage snowblower, an impeller kit installation is possible.

8. The Different Methods of Installing Impeller Kits

There are different methods of installing impeller kits, depending on personal preference and the tools available. Some people prefer using self-tapping screws, while others opt for bolts. Both methods have shown to be effective, but it's important to ensure that the impeller blades are securely fastened. In this article, we will focus on the bolt method, as it provides a reliable and Durable installation.

9. Step-by-Step Guide to Installing an Impeller Kit with Bolts

To install an impeller kit with bolts, you will need the kit itself, which typically includes Rubber paddles, metal washer straps, bolts, lock nuts, and self-tapping screws. The following is a step-by-step guide on how to install the impeller kit:

1. Begin by removing the snow chute to gain access to the impeller area.

2. Measure the length of the rubber paddles, ensuring they are approximately three and a quarter inches long.

3. Cut the rubber paddles to the desired length using a multi-tool or a box knife.

4. Position the rubber flap on the impeller blade, leaving a small gap.

5. Mark the holes for the bolts and remove the rubber paddle for drilling.

6. Drill pilot holes using a suitable drill bit, ensuring the impeller does not spin during the process.

7. Vacuum out any metal shavings from the drilling process.

8. Slide the metal washer straps with bolts through the paddle and impeller holes.

9. Fasten the nuts behind the impeller to secure the rubber paddle.

10. Use an impact driver and wrench to tighten the nuts and bolts securely.

11. Repeat the process for each impeller blade, ensuring a consistent gap and tight fit.

12. Reattach the snow chute and secure it in place.

13. The Results and Performance of a Snowblower with an Impeller Kit

After installing an impeller kit, the performance of your snowblower will be noticeably improved. With a reduced gap between the impeller blade and the housing, the snowblower can easily plow through heavy, wet, and packed snow without clogging. The increased throwing distance ensures that snow is thrown farther, allowing for efficient snow removal. Additionally, the impeller kit enhances the overall surface life of the snowblower by reducing strain and preventing excessive wear on the machine.

11. Maintenance and Care Tips for Snowblowers with Impeller Kits

While snowblowers with impeller kits require minimal maintenance, there are a few key tips to keep in mind. It is essential to regularly inspect the rubber paddles for any signs of wear or damage. If necessary, replace the rubber paddles to maintain optimal performance. Additionally, it is advisable to clean the snowblower after each use to remove any debris or snow buildup. This ensures that the impeller kit continues to function at its best and extends the snowblower's longevity.

12. Conclusion

Adding an impeller kit to your two-stage snowblower is a game-changer when it comes to enhancing throwing distance and overall performance. The kit's ability to reduce snow clogging and plow through heavy, wet, and packed snow makes snow removal a breeze. With a step-by-step installation guide and various methods available, upgrading your snowblower with an impeller kit is a worthwhile investment. Experience the benefits firsthand and enjoy the unstoppable performance of your snowblower even in the harshest winter conditions.