Step-by-Step DIY Guide to Making a Stylish Puffer Jacket

Step-by-Step DIY Guide to Making a Stylish Puffer Jacket

Table of Contents

1. Introduction
2. Materials Needed
3. Folding and Cutting the Fabric
4. Sewing the Arms
5. Cutting and Sewing the Back Part
6. Creating the Collar
7. Sewing the Quilt Batting
8. Hemming the Inside Lining
9. Sewing the Sleeves
10. Stuffing the Coat
11. Sewing the Front Pieces Together
12. Sewing the Collar
13. Sewing the Sleeves
14. Aligning and Sewing the Front and Back Parts
15. Adding the Inside Lining
16. Adding the Zippers
17. Conclusion

How to Make a Bomber Puffer Crop Coat

Are You looking for a stylish and unique outerwear piece that you can make yourself? Look no further! In this article, I will guide you through the step-by-step process of creating your very own bomber puffer crop coat. With just a few materials and some sewing skills, you'll have a trendy and personalized coat that's perfect for any occasion.

Introduction

Before we dive into the details, let's talk about what a bomber puffer crop coat is and why you should consider making one. A bomber puffer crop coat is a shortened version of the classic bomber jacket, with added quilt batting to give it a puffy appearance. This trendy outerwear piece is not only fashionable but also cozy and warm, making it a must-have for colder seasons.

Materials Needed

To make your own bomber puffer crop coat, you will need the following materials:

• Cotton fabric (for the inside lining and outside of the coat)
• Quilt batting (for the puffy effect)
• Zipper (to fasten the coat)
• Sewing machine
• Pins
• Scissors

Folding and Cutting the Fabric

To start, fold your fabric inside out and Align the edges. This will ensure that both the inside lining and outside fabric have the same size and Shape. You'll also need to cut the quilt batting to match the shape of the fabric pieces. This quilt batting will be inserted between the lining and the outer fabric to Create the puffy effect.

Sewing the Arms

Begin by cutting out the arms of the coat. Remember to leave enough seam allowance to allow for stuffing later on. Pin the fabric in place to prevent any movement while cutting. Repeat these steps for both arms, ensuring that they are symmetrical.

Cutting and Sewing the Back Part

Next, cut out the back part of the coat, adding seam allowance as needed. Pay close Attention to the shape of the neckline, ensuring it forms a U shape. Pin the fabric in place and cut accordingly. The back part should be larger than the arms.

Creating the Collar

The collar does not require quilt batting or lining. Cut out the fabric for the outside part of the collar and draw lines that will create the puffy look. These lines will serve as guides for sewing, where the cotton will be inserted. Pin the fabric to keep it in place during sewing.

Sewing the Quilt Batting

Take the cut-out fabric pieces and sew along the lines you drew earlier. This will create compartments for the cotton stuffing. Remember to keep each line approximately five inches apart for the torso and arms. Pin the fabric to secure it before sewing to ensure precise alignment.

Hemming the Inside Lining

Similar to the outside lining, hem the inside lining of the coat by folding it and sewing it down. This will give it a neater appearance and prevent fraying. Use the same sewing technique as with the other fabric pieces.

Sewing the Sleeves

Start sewing down the lines on the sleeves, leaving the sides open. This ensures that the cotton stuffing stays in place and creates the puffy effect at the top of the sleeves. Sew down the top part of the sleeves to secure the cotton, but avoid sewing the sides shut.

Stuffing the Coat

Now it's time to stuff your coat. Take the cotton stuffing and fill the compartments you created earlier, making sure not to overstuff. The coat should be puffy but not too bulky. Repeat this step for the arms and front parts of the coat.

Sewing the Front Pieces Together

Align the inside lining and outside fabric of the front parts of the coat and sew them together. This will enclose the cotton stuffing and give a finished look to the coat. Pin the fabric before sewing to maintain alignment. Repeat the same sewing technique for the other side.

Adding the Inside Lining

Fold and insert the inside lining into the coat, making sure it is neatly aligned. Pin the lining in place before sewing to ensure it stays in position. Sew along the edges to secure the lining and give the coat a professional finish.

Adding the Zippers

To complete your bomber puffer crop coat, insert the zippers between the outer fabric and inside lining. Fold the lining as you add the zippers to achieve a factory-made look. Sew along the edges of the zippers to secure them in place. This finishing touch will not only add functionality to your coat but also enhance its aesthetic appeal.

Conclusion

Congratulations, you've successfully created your very own bomber puffer crop coat! With just a few materials and some sewing skills, you can now enjoy a trendy and personalized outerwear piece that will keep you warm and stylish. Experiment with different fabrics and Patterns to make your coat truly unique. Get creative and showcase your fashion-forward Sense with this DIY project. Stay warm and fashionable all season long!