Unleash the Power of the Bigly Brothers GD93 Midnight Specter GPS Drone

Unleash the Power of the Bigly Brothers GD93 Midnight Specter GPS Drone

Table of Contents

1. Pre-flight Preparation
2. Unpacking the Drone
3. Drone Assembly
4. Drone Setup
   1. Finding a Level Ground
   2. Powering On the Drone
   3. Connecting the Remote Control
   4. Gyro Calibration
   5. Compass Calibration
   6. GPS Signal Acquisition
5. Unlocking the Drone
6. Flying the Drone Outdoors
   1. Safety Guidelines
   2. Taking Off
   3. Basic Flight Controls
   4. Speed Modes and Headless Mode
   5. Return to Home Function
7. Flying the Drone Indoors
   1. Switching to Indoor Mode
   2. Considerations for Indoor Flight
8. Using the Drone Application
   1. Connecting to the App
   2. Controlling the Drone
   3. Accessing Additional Features
9. Camera and Recording Functions
   1. Adjusting the Camera
   2. Switching Between Cameras
   3. Editing Videos and Adding Music
   4. Gesture Control for Photos and Videos
10. Advanced Flight Modes
    1. Follow Mode
    2. Waypoint Flight
    3. Flying Around
11. Battery Replacement and Charging
    1. Charging the Drone Battery
    2. Charging the Remote Control
12. Blade Installation
13. Bigly Care Package
14. Conclusion

Pre-flight Preparation

Before taking your drone for a flight, it's important to make sure you have everything in order. Start by carefully unpacking the drone from its carrying case, being mindful of the camera and gimbal. Place the drone on a level surface and power it on, while also turning on the remote control and establishing a successful connection. Calibrate the gyro and compass to ensure accurate flight, and wait for the drone to acquire GPS signals. Finally, unlock the propellers and prepare for a safe and enjoyable flight.

Unpacking the Drone

To begin the process, open the carrying case with caution to avoid any potential damage to the Contents inside. Locate the remote controller and the drone within the carrying case. Carefully take out the drone, being mindful not to Apply pressure to the camera or manually move the camera's 3-axis gimbal. Once the drone is out of the case, unfold all its arms slowly and ensure that they are fully extended. This step is crucial to prevent any unexpected crashes while flying.

Drone Assembly

After unpacking the drone, it's time to assemble it. Start by finding a level ground surface and place the drone on it. Take note of the LED lights gauge on the battery, as it indicates the real-time power level of the battery. Next, locate the power button on the drone and press it for approximately five seconds until the drone turns on. Wait for about three seconds before proceeding to the next step.

Drone Setup

Finding a Level Ground

Before taking off, it's essential to find a level ground for the drone. This ensures a stable takeoff and landing. Look for a flat surface, preferably free from any obstacles or debris. A level ground provides a solid foundation for the drone and reduces the risk of accidents during flight.

Powering On the Drone

To power on the drone, locate the power button on its body. Press and hold the power button for about five seconds until You see the drone's LED lights start to flash. This indicates that the drone is initializing and preparing for flight. Wait for about three seconds to ensure that the drone has fully powered on.

Connecting the Remote Control

To control the drone, you need to connect the remote control. Turn on the remote control by pressing its power button once. When the remote control is turned on, it will emit three beeps, and the green LED light in front of the drone should stay on. This indicates a successful connection between the drone and the remote control.

Gyro Calibration

Gyro calibration is an important step to ensure stable flight and accurate control of the drone. Locate the gyro calibration button on the remote control. Press and hold this button for about three seconds. As you do this, the LED light indicator of the rear and back arm of the drone will start to flash quickly and then stay on, accompanied by a beep sound from the remote control. These signals indicate that the gyro calibration is successful.

Compass Calibration

Compass calibration is necessary to ensure accurate navigation and flight stability. Locate the compass calibration button on the remote control. Press and hold this button for about three seconds. You will hear a beep sound from the remote control, and the LED light indicator of the rear arm of the drone will flash quickly, indicating that the compass calibration process has started.

GPS Signal Acquisition

To ensure optimal flight performance and precise positioning, the drone needs to acquire GPS signals. Position yourself facing the drone and slowly rotate it clockwise three times. As you do this, the rear red light indicator of the drone's arm will flash quickly and then stay on, accompanied by a beep from the remote control. This signifies a successful calibration for the drone's facing direction.

Now, face the drone towards the sky and slowly rotate it clockwise three times. This action will cause the back green light indicator of the drone's arm to flash quickly and then stay on, along with a beep from the remote control. These signals confirm a successful compass calibration.

Unlocking the Drone

Before taking off, it's essential to unlock the drone's propellers. To do this, press and hold the unlock button on the remote controller for three seconds or until the propellers start spinning. This action signifies that the drone is ready for flight. It's important to note that you should fly the drone in a wide-open outdoor area for safety. Additionally, ensure that the drone has more than eight GPS signals before taking off.

Flying the Drone Outdoors

Now that you have successfully set up the drone, it's time to fly it outdoors. However, it's crucial to consider safety guidelines and follow local regulations while operating the drone. Make sure to fly in a wide-open outdoor area away from people, buildings, and other potential obstacles.

When taking off, be sure to check the battery level and GPS signal count on the remote control. It's recommended to have at least eight GPS signals before flying the drone. To take off, push the left throttle stick upward to make the drone ascend and fly higher. Use the left throttle stick to control the drone's altitude and the right throttle stick to control its movement.

Basic Flight Controls

To control the drone during flight, here are the basic flight controls:

1. Left Throttle Up: Push the left throttle stick upward to make the drone ascend and fly higher.
2. Left Throttle Down: Push the left throttle stick downward to make the drone descend and fly lower.
3. Left Throttle Left: Move the left throttle stick to the left to make the drone turn left.
4. Left Throttle Right: Move the left throttle stick to the right to make the drone turn right.
5. Right Throttle Up: Push the right throttle stick upward to make the drone fly forward.
6. Right Throttle Down: Push the right throttle stick downward to make the drone fly backward.
7. Right Throttle Left: Move the right throttle stick to the left to make the drone fly left sideward.
8. Right Throttle Right: Move the right throttle stick to the right to make the drone fly right sideward.

Speed Modes and Headless Mode

The drone offers different speed modes for varying flying experiences. By default, the drone operates in first gear mode. Press the speed button to switch to the Second gear mode. The remote controller will emit two beeps to indicate the mode change. Note that there are only two speed modes available.

Headless mode is a helpful feature for beginners. When activated, the drone's orientation is independent of its actual direction. Press the headless mode button to activate it. The remote controller will beep three times to indicate that headless mode is turned on. Press the button again to turn off headless mode, and it will beep once.

Return to Home Function

The drone is equipped with a return to home function, which allows it to automatically return to its initial takeoff position. Press the return to home button on the remote control, and the drone will start its Journey back to the starting point. Note that the return to home function requires GPS mode to be turned on.

Flying the Drone Indoors

If you prefer to fly the drone indoors, it's recommended to switch to indoor mode for better control and safety. To switch to indoor mode, press and hold the GPS button on the remote control for three seconds. This action will activate the indoor optical flow mode and turn off the GPS. However, flying the drone indoors is not recommended for beginners to avoid potential crashes or damage to the drone.

Using the Drone Application

To enhance your drone flying experience, you can connect your phone to the drone using Wi-Fi and utilize the drone application. Follow the steps below to connect to the app and access additional features and settings:

1. Connecting to the App:

   • Go to your phone's settings and select Wi-Fi.
   • Look for the drone's Wi-Fi network name, which typically starts with "vs GPS XX." This name should be listed among the available networks.
   • Connect your phone to the drone's Wi-Fi network.

2. Launching the App:

   • Open the LW Pro application on your phone.
   • Agree to the user agreements and privacy policy if prompted.
   • Grant the necessary permissions when prompted.

3. Establishing Connection:

   • Press the start button in the application.
   • Wait for the drone's camera image to appear on your phone's screen.
   • Once the image from the drone's camera appears on your phone screen, it indicates that the drone application is ready for use.

Now, you can use the drone application to control the drone's flight, access additional features, and adjust various settings. However, always remember to exercise caution and fly the drone safely indoors, considering the limited space and potential obstacles.

Camera and Recording Functions

The drone is equipped with a camera that allows you to capture photos and Record videos during your flight. Here are the various camera and recording functions available:

• Adjusting the Camera: The drone's camera position can be adjusted using the camera adjusting knob. By turning the knob to the right, the camera will move downward, and by turning it to the left, the camera will move upward. The camera can be adjusted up to 120 degrees.
• Switching Between Cameras: The drone has both a front camera and a bottom camera. Use the lens switch icon in the app to switch between the two cameras.
• Editing Videos and Adding Music: The MV making icon in the app allows you to edit videos and add music to them. Explore this feature to enhance your captured footage.
• Gesture Control for Photos and Videos: With the gesture photo video icon, you can control the camera using HAND gestures. Make a Y-Shaped hand gesture to automatically take a photo after a three-second countdown. Use a Palm hand gesture to automatically start recording a video. Repeat the gesture to stop recording.

Advanced Flight Modes

In addition to basic flight controls, the drone offers advanced flight modes to enhance your flying experience. These modes provide additional functionality and unique flight maneuvers. Here are some of the advanced flight modes available:

• Follow Mode: Activate follow mode to enable the drone to follow your mobile phone's GPS location. This feature is handy for capturing dynamic footage while on the move.
• Waypoint Flight: Use this feature to draw waypoints on the map in the drone application. Once you click the send icon, the drone will fly according to the order of the waypoints you drew. This allows for automated flight paths and precise control over the drone's route.
• Flying Around: The fly around icon enables the drone to fly around in either a clockwise or counterclockwise direction. Select the desired direction and watch the drone elegantly maneuver around its flight path.

Battery Replacement and Charging

The drone's battery plays a crucial role in its operation. It's important to know how to replace and charge the battery properly. Here are the steps to follow:

1. Charging the Drone Battery:

   • Connect the USB to micro USB charging cable to the battery.
   • Connect the other end of the cable to a 5V charger adapter or USB port.
   • The LED light on the battery will stop flashing when it's fully charged.
   • Charging time is approximately 200 minutes.
   • It's recommended to use a fast 5V charger adapter for better performance.

2. Charging the Remote Control:

   • Connect the USB to micro USB charging cable to the remote control.
   • Connect the other end of the cable to a 5V charger adapter or USB port.
   • The green LED indicating light will be on while charging and turn off when it's fully charged.
   • Charging time is approximately 30 minutes.
   • It's recommended to use a fast 5V charger adapter for better performance.

Blade Installation

At some point, you may need to replace the drone's blades. Here's how you can do it:

1. Unscrew the screws and remove the existing drone blades.
2. Attach a propeller labeled "A" to any "A" motor and a propeller labeled "B" to any "B" motor. The specific numbers indicated in the propeller (e.g., A1, A2, B1, B2) do not matter.
3. Once you replace the propellers, make sure to tighten the screws securely to ensure proper attachment and safe flight.

Bigly Care Package

To provide you with peace of mind, we offer the Bigly Care Package, which includes one year of full coverage. Accidents, Water damage, or even a lost drone are no problem with Bigly Care Refresh. You'll have your drone fully protected for a full year, giving you the ultimate peace of mind.

Conclusion

With proper pre-flight preparation, careful assembly, and following the instructions for setup and flight, you are ready to embark on your drone flying journey. Always remember to prioritize safety, abide by local regulations, and exercise caution during every flight. Enjoy the excitement and breathtaking views as you explore the world from a new perspective with your drone. Happy flying!

Highlights

• Pre-flight preparation is crucial for a safe and enjoyable drone flying experience.
• It's important to follow the proper assembly steps to ensure the drone is ready for flight.
• Drone setup involves finding a level ground, powering on the drone, and establishing a connection with the remote control.
• Gyro and compass calibration are necessary for stable flight and accurate navigation.
• Acquiring GPS signals is essential for optimal flight performance and precise positioning.
• Flying the drone outdoors requires a wide-open area and adherence to safety guidelines.
• The drone application allows for enhanced control and access to additional features and settings.
• Camera and recording functions offer creative possibilities for capturing photos and videos.
• Advanced flight modes, like Follow Mode and Waypoint Flight, provide unique flight maneuvers.
• Proper battery maintenance, charging, and blade installation are important for drone longevity.
• The Bigly Care Package offers one year of comprehensive coverage for your peace of mind.

FAQ

Q: Is flying the drone indoors recommended? A: While the drone can be flown indoors by switching to indoor mode, it's generally not recommended for beginners due to the limited space and potential obstacles.

Q: How can I connect my phone to the drone application? A: Connect your phone to the drone's Wi-Fi network and launch the LW Pro application. Grant the necessary permissions, and you'll be able to control the drone through the app.

Q: Can the drone follow my movement? A: Yes, the drone offers a Follow Mode that allows it to track your mobile phone's GPS location, making it perfect for capturing dynamic footage on the go.

Q: How long does it take to charge the drone battery and the remote control? A: Charging the drone battery takes approximately 200 minutes, while charging the remote control takes about 30 minutes. Using a fast 5V charger adapter is recommended for better performance.

Q: What are the basic flight controls for the drone? A: The left throttle stick controls altitude and turning, while the right throttle stick controls movement and sideward flying. Detailed instructions can be found in the article.

Q: Can I replace the drone's blades? A: Yes, the drone's blades can be replaced. Follow the instructions provided in the article for proper installation and ensure that the screws are securely tightened.

Q: What additional features does the drone application offer? A: The drone application allows for adjusting camera settings, switching between cameras, editing videos, adding music, and utilizing gesture control for photos and videos. Additional advanced flight modes are also available.

Q: Does the drone come with any warranty or care package? A: Yes, the Bigly Care Package offers one year of full coverage, protecting your drone against accidents, water damage, and even loss.