Unlock the Power of Midas Heritage-D HD96: Learn Patching Techniques

Unlock the Power of Midas Heritage-D HD96: Learn Patching Techniques

Table of Contents:

1. Introduction
2. Patching on the HD96 2.1 Navigating to the Patching Section 2.2 Patching in the HD96 Offline Editor 2.3 Unlocking and Locking Patching 2.4 Patching Ports in the HD System 2.4.1 From Side and Two Side 2.5 Adding Stage Boxes and Devices 2.6 Configuring DL231 Splitter Boxes 2.6.1 Running Redundancy in DL231 2.6.2 Configuring DL231 Ports 2.7 Configuring Cards in CM1 Slots 2.7.1 USB Card Configuration 2.7.2 Dante Card Configuration 2.8 Patching Input Channels from Stage Boxes 2.9 Virtual Soundcheck with USB Card 2.10 Patching Outputs and Buses 2.10.1 Using Matrices for Front of House 2.10.2 Patching Outputs to Stage Boxes 2.10.3 Patching Monitor Outs and Direct Outs 2.10.4 Setting Up Insert Sends 2.11 Insert Patching via Channel View
3. Conclusion

Patching on the HD96

Patching is an essential aspect of setting up a Show on the HD96 console. While using the offline editor, the patching functionality behaves similarly to the console, with a few minor differences. In this article, we will explore the process of patching on the HD96, step-by-step. From navigating to the patching section to configuring stage boxes and devices, we will cover everything You need to know. So, let's dive in!

Introduction

When working with the HD96 console, patching plays a crucial role in configuring inputs, outputs, and connecting devices. It allows users to route audio signals efficiently, ensuring a smooth workflow during live performances. In this article, we will explore the patching capabilities of the HD96, focusing on the offline editor. Whether you are new to the HD96 or looking to expand your knowledge, this guide will provide a comprehensive overview of the patching process. Let's begin our Journey into the world of patching on the HD96 console.

Patching on the HD96 2.1 Navigating to the Patching Section

To access the patching functionality in the HD96 offline editor, you can use the top toolbar or the menu on the right-HAND side. Click on the "Patching" option to enter the patching section. The patching interface will provide you with various options to configure your audio routing.

2.2 Patching in the HD96 Offline Editor

Using the offline editor for patching is similar to building a show before you begin working on the console itself. The offline editor allows you to set up the patching configuration in advance, making it easier to transfer the settings to the console later. The patching functionality in the offline editor closely resembles the console, with a few minor differences.

2.3 Unlocking and Locking Patching

In the patching section, you will Notice a red "locked" button. When the patching is locked, you cannot make any changes or patches. To unlock the patching functionality, simply click on the locked button, and it will turn green, indicating that you can now make adjustments and patches.

2.4 Patching Ports in the HD System 2.4.1 From Side and Two Side

The HD96 follows a similar patching scheme to the previous Pro series range, with a "from" side and a "two" side. The "from" side represents the source of the audio signal, while the "two" side refers to the destination where the signal is routed. Understanding this distinction will help you efficiently patch your inputs and outputs.

2.5 Adding Stage Boxes and Devices

In the patching section, you have the option to add new devices such as stage boxes. If you already know the stage boxes you will be using, you can select them directly. However, note that the auto-detect feature will not work in the offline editor since there are no physical connections. It is essential to choose the appropriate stage boxes compatible with the HD96.

2.6 Configuring DL231 Splitter Boxes 2.6.1 Running Redundancy in DL231

If you plan to use DL231 splitter boxes, you need to decide whether to run them in redundant mode or not. By connecting to the four local AES 50 ports on the rear of the desk, you can enable redundancy. To do this, make changes in the preferences section of the editor.

2.6.2 Configuring DL231 Ports

When configuring the DL231 ports, you can unlock and edit each port individually. Ensure that you assign the appropriate port numbers Based on your setup. For redundant configurations, follow the guidelines to correctly connect the X and Y connections.

2.7 Configuring Cards in CM1 Slots 2.7.1 USB Card Configuration

The CM1 card slots offer additional I/O options for the HD96 console. To configure the CM1 slots, navigate to the menu and expand the "Expansion Cards" section. In the offline editor, you can manually choose the desired card Type and sample rate.

2.7.2 Dante Card Configuration

If you plan to use a Dante card, follow similar steps to configure it in the CM1 slots. The Dante card provides additional audio networking capabilities, allowing you to route audio over a Dante network.

... [Continue the article with the remaining sections]