Upgrade Your Kubota BX with Ai2 Products Pallet Forks

Table of Contents

1. Introduction
2. Comparison of the old and new carriage
3. Design and structure of the new carriage
4. Benefits of the new carriage design
5. Forks and their features
6. Weight capacity and stability
7. How to use the quick hitch system
8. Frequently asked questions about the tractor attachments
9. Upcoming videos and modifications for the tractor
10. Conclusion

Article

Introduction

In this article, we will be discussing the new carriage design for tractor attachments. We will explore the differences between the old and new carriage, the benefits of the new design, and the features of the forks. Additionally, we will provide information on the weight capacity and stability of the carriage, as well as how to use the quick hitch system. We will also address some frequently asked questions and provide insights into upcoming videos and modifications for the tractor attachments.

Comparison of the old and new carriage

The new carriage design for tractor attachments differs from the old version in several ways. Firstly, the old carriage was made of 7 gauge steel, while the new carriage is made of quarter-inch thick steel. The forks on the old carriage were also made of 7 gauge steel, whereas the new forks are three inches wide, one inch thick, and made of quarter-inch plate steel.

Design and structure of the new carriage

Unlike the old carriage, which had a square top rail and a formed up Channel for the lower fork trail, the new carriage has a two-inch OD tube with a 145,000 wall thickness as the top rail. This design change not only provides structural strength but also helps to prevent twisting. The new carriage also features a gusset plate for the fork rail, which creates a mechanical connection and enhances overall stability.

Benefits of the new carriage design

The new carriage design offers several benefits over the old version. Firstly, it is lighter due to the elimination of unnecessary mass. This weight reduction allows for improved lifting capacity and stability. The new carriage design also allows for the forks to be placed closer to the pivot point of the quick hitch, resulting in greater lift capacity. Additionally, the new carriage design provides a higher weight rating of 600 pounds, ensuring that it can handle a wide range of loads.

Forks and their features

The forks on the new carriage are three inches wide, one inch thick, and have a nine and a half inch back. These heavy-duty forks are designed to handle loads up to 1500 pounds. Once weight is applied to the forks, they lock into place, providing stability and preventing slippage. The forks also feature a backstop, allowing for the secure transportation of tall or bulky items. It is also possible to use ratchet straps to further secure the load.

Weight capacity and stability

The new carriage design has a weight capacity rating of 600 pounds, which is suitable for most lifting tasks. However, it is important to note that the actual lift capacity of the tractor may vary depending on its setup. The stability of the carriage is ensured by the interlocking design of the gusset plate, fork rail, and side plates. This design prevents twisting and provides overall structural strength.

How to use the quick hitch system

The quick hitch system allows for fast and easy attachment of tractor implements. To use the quick hitch system, simply position the attachment's top hook onto the tractor's lower hooks and secure it in place. The quick hitch system locks the attachment securely, ensuring safe operation. It is important to follow the manufacturer's instructions and guidelines when using the quick hitch system to ensure proper alignment and attachment.

Frequently asked questions about the tractor attachments

1. What is the weight capacity of the new carriage? The new carriage has a weight capacity rating of 600 pounds.

2. Can the carriage handle HEAVIER loads than its weight capacity rating? While the carriage may have no problem handling more than its weight capacity rating, it is essential to consider the tractor's overall lift capacity and setup. Typically, the tractor is rated for around 550 pounds of lift.

3. Are the forks on the new carriage adjustable? No, the forks on the new carriage are not adjustable. They are fixed at a nine and a half inch back.

4. Can the forks on the new carriage be locked in place? Yes, once weight is applied to the forks, they lock into place, providing stability and preventing slippage.

Upcoming videos and modifications for the tractor

In the upcoming videos, we will be showcasing various modifications that can be done to the tractor attachments. These modifications aim to enhance performance, efficiency, and versatility. We will also cover the upgrade to hydraulics, which will further improve the functionality of the tractor attachments. Stay tuned for more informative and exciting videos.

Conclusion

The new carriage design for tractor attachments offers improved functionality, enhanced stability, and increased weight capacity. With its sturdy construction and thoughtful design, the new carriage provides a reliable solution for a wide range of lifting tasks. The forks are robust and feature a backstop, ensuring the secure transportation of various loads. Additionally, the quick hitch system allows for easy attachment and detachment of implements. For more information and updates, feel free to contact us or visit our Website.