Upgrade Your Kubota BX with Ai2 Products Quick-Tach

Upgrade Your Kubota BX with Ai2 Products Quick-Tach

Table of Contents:

1. Introduction
2. Removing the Bucket
3. Tools Needed
4. Taking off the Bucket
5. Greasable Pins
6. Installing the Quick Catch
7. Potential Issues with Loader Arms
8. Frequently Asked Questions (FAQs)
9. Conclusion

Introduction

In this article, we will be discussing the process of installing a quick catch, a useful tool for those who frequently need to change attachments on their equipment. We will provide step-by-step instructions on how to remove the bucket, the tools You will need for the job, and the proper way to install the quick catch. Additionally, we will cover some potential issues that may arise with loader arms and provide solutions for them. So, let's get started!

Removing the Bucket

The first step in installing a quick catch is to remove the bucket from your equipment. This is necessary to access the attachment points for the quick catch. Start by setting the bucket on the ground, making sure that the pressure is off the pins. This will ensure that you can easily remove the bucket without any resistance. Next, Gather the required tools to complete the removal process.

Tools Needed

To take off the bucket, you will need metric tools. Specifically, you will need a 12-millimeter wrench, a 10-millimeter wrench, and another wrench for each of those sizes. The 12-millimeter wrench is used to remove the center Pin bolt, while the 10-millimeter wrenches are required for the loader pivot point. These tools are essential, so make sure you have them on HAND before proceeding with the task.

Taking off the Bucket

With the necessary tools in hand, you can now start the process of removing the bucket. Use the wrench or socket to loosen and remove the center pin bolt. Set the bolt aside in a safe place, as you will need it later. Next, locate the nylock nuts on each side of the loader pivot point. These nuts need to be spun all the way out. Keep in mind that they are nylock nuts, which means they have a nylon insert that prevents them from loosening on their own. Carefully remove the nuts and set them aside.

Greasable Pins

Before moving on to installing the quick catch, it's essential to understand the greasable pins that come with it. These pins have a grease zerk and a grease Channel. While the pins are in place, the grease will flow inside them, ensuring smooth operation. When dismantling the quick catch or changing attachments, it is crucial to keep these pins. They are designed to be greased and may get dirty and greasy due to their function.

Installing the Quick Catch

Now that you have removed the bucket and understand the greasable pins, it's time to install the quick catch. Hold the quick catch in place and Align the pinholes. Use the original bolts to secure the quick catch. These bolts should drop through the pinholes on both sides easily. Tighten them securely to ensure that the quick catch is properly attached.

Potential Issues with Loader Arms

It's important to be aware of potential issues that may arise with loader arms during the quick catch installation process. In some cases, when the bucket is removed, the loader arms may pop out or spring in due to tension or the way they were welded. If this occurs, do not worry. Simply use a clamp to hold the arms in place and install the quick catch. The quick catch will provide stability and hold the arms in their correct position.

Frequently Asked Questions (FAQs)

1. Can I use different-sized wrenches for removing the center pin bolt and the loader pivot point?

   It's best to use the recommended 12-millimeter and 10-millimeter wrenches to ensure a proper fit and avoid damaging the bolts or nuts.

2. How often should I grease the greasable pins?

   It is recommended to grease the pins regularly to maintain smooth operation. Greasing can be done during routine maintenance or whenever needed.

3. What should I do if the quick catch pins are difficult to remove or install?

   If the pins are sticking due to paint build-up, use a tap or a cleaner pin to carefully push them through. Be patient and gentle to avoid damaging the pins or bushings.

Conclusion

Installing a quick catch can greatly improve efficiency and convenience when changing equipment attachments. By following the step-by-step instructions provided in this article, you can easily remove the bucket, install the quick catch, and address potential issues with loader arms. Remember to use the appropriate tools, grease the greasable pins, and Seek assistance if you encounter any difficulties. With the quick catch in place, you'll be able to switch attachments effortlessly, saving time and effort.