The Future of Charging - Bronco Wireless Charger

The Future of Charging - Bronco Wireless Charger

Table of Contents:

1. Introduction
2. Why Install a Wireless Charger in Your Car?
3. Tools and Materials Needed
4. Removing the Handle and Trim
5. Peeling off the Top Piece
6. Removing the Console Dial
7. Removing the Screws
8. Installing the Wireless Charger
9. Reassembling the Console
10. Testing the Charger
11. Conclusion

Title: How to Install a Wireless Charger in Your Car

Introduction:

Are You tired of dealing with tangled cables and messy cords in your car? If so, installing a wireless charger in your vehicle can be a convenient and hassle-free solution. In this guide, we will walk you through the step-by-step process of installing a wireless charger in your car. Say goodbye to the clutter and enjoy effortless charging on the go.

Why Install a Wireless Charger in Your Car?

Having a wireless charger in your car offers several benefits. Here are some reasons why you should consider installing one:

1. Convenience: With a wireless charger, you can simply place your phone on the charging pad without the need for any cables or connectors. This makes it easier and quicker to charge your device while on the road.

2. Reduced Clutter: Say goodbye to messy cords and tangled cables. A wireless charger eliminates the need for multiple charging cables, making your car interior cleaner and more organized.

3. Safety: Trying to plug in a charger cable while driving can be distracting and dangerous. A wireless charger eliminates this risk as you can simply place your phone on the charging pad with one HAND, keeping your focus on the road.

Tools and Materials Needed:

Before we begin, Gather the following tools and materials:

1. Screwdriver set
2. Stubby screwdriver
3. T20 Torx screwdriver
4. Wire harness
5. Wireless charger kit
6. Cleaning cloth

Removing the Handle and Trim:

The first step is to remove the handle and trim around the console. Follow these instructions:

1. If your car has a handle, remove it by unscrewing the two bolts holding it in place. If you have a blank off plate instead, remove the plate by unscrewing the bolts.

2. Peel off the top piece of the console trim. Using a tool provided in the wireless charger kit, gently lift the edge of the trim to release the clips and remove it. Set it aside for reinstallation later.

Peeling off the Top Piece:

Next, we need to remove the top piece of the console to access the internal components. Follow these steps:

1. Locate the dial on the front side of the console. Pinch the clip underneath the dial and pull it down to release it.

2. Lift the console upwards to reveal the screws holding it together. Use a stubby screwdriver to remove the two screws.

3. Carefully remove the console piece and set it upside down on a clean surface.

Removing the Screws:

Now, we need to remove the screws that hold the console together. Here's what you need to do:

1. Locate the two screws on the front side of the console. These screws are smaller in size, so be careful not to drop them.

2. Use a magnetized screwdriver or hold a magnet against your screwdriver to prevent the screws from falling. Carefully remove the screws.

Installing the Wireless Charger:

Once the console is disassembled, it's time to install the wireless charger. Follow these steps:

1. Take the wireless charger out of the box and Align it with the designated area in the console. Ensure that the charger fits properly and securely.

2. Fasten the wireless charger in place by using the four T20 screws provided in the wireless charger kit.

3. Connect the wire harness to the power and ground connections on the wireless charger. Refer to the instructions in the kit for proper guidance.

Reassembling the Console:

Now that the wireless charger is installed, it's time to reassemble the console. Follow these steps:

1. Reconnect the wire harness that was previously connected to the console.

2. Align the dial with the console and push it back into place. Ensure that it snaps securely.

3. Wipe down the console and trim to remove any Dust or fingerprints.

Testing the Charger:

Before finishing, it's important to test the wireless charger. Follow these steps:

1. Remove any protective stickers from the charging pad.

2. Place your phone on the charging pad and ensure that it starts charging. If necessary, adjust the position of your phone to achieve proper charging.

3. Test different phone orientations (e.g., landscape or portrait) to ensure that the charger works in any position.

Conclusion:

Congratulations! You have successfully installed a wireless charger in your car. Enjoy the convenience of effortless charging and say goodbye to messy cords and cables while on the road. Remember to regularly clean the charging pad and keep it free from dust and debris to maintain optimal performance.

Highlights:

• Installation of a wireless charger in your car offers convenience and reduces clutter.
• Removing the handle and trim allows access to the internal components.
• Peeling off the top piece of the console reveals the screws holding it together.
• Installing the wireless charger requires secure attachment and connection to power and ground.
• Reassembling the console involves reconnecting the wire harness and ensuring a snug fit.
• Testing the charger confirms proper functionality and compatibility with various phone orientations.

FAQ:

Q: Will a wireless charger fit all phone sizes? A: Most wireless chargers can accommodate standard-sized phones. Larger phones may also fit, but it's recommended to check the dimensions of the wireless charger before purchasing.

Q: Do I need any special tools for the installation? A: You will need basic screwdrivers, including a stubby screwdriver and a T20 Torx screwdriver. Some wireless charger kits may include specialized tools for easier installation.

Q: Can I still use a cable to charge my phone after installing a wireless charger? A: Yes, you can still use a charging cable if needed. However, the wireless charger provides a convenient and clutter-free option for everyday charging.

Q: Is it difficult to remove the console and reassemble it? A: The process of removing and reassembling the console requires some basic knowledge of car interiors and a careful approach. Following the provided instructions should make the task manageable for most DIY enthusiasts.

Q: Can I install a wireless charger in any car model? A: Wireless chargers can be installed in most cars, but the specific installation process may vary depending on the car's make and model.