Upgrade Your Landcruiser with Clearview Mirrors
Table of Contents:
- Introduction
- Unboxing the Clear Views
- Removing the Door Trim
- Drilling Holes for the Mirror
- Attaching the Mirror
- Dry Run Fit
- Removing the GXR Badge
- Wiring the Lights
- Wiring the Control Module
- Wiring Challenges and Solutions
- Finishing the Installation
- Adding Puddle Lights
- Wrapping the Wiring
- Conclusion
Introduction
Welcome back to another episode! In this article, we will be discussing the installation process of a set of Clear Views. We will cover everything from unboxing the product to the final steps of the installation. If You're considering installing Clear Views yourself, this article is for you. Let's dive in and see how easy or hard it really is!
Unboxing the Clear Views
Let's start with the unboxing process. Upon receiving your Clear Views, you'll find everything you need for the installation. Take a moment to familiarize yourself with the contents of the box. This will help you understand what each component is used for during the installation process.
Removing the Door Trim
Before we can begin installing the Clear Views, we need to remove the door trim. This will give us access to the inside of the door where the mirrors will be attached. Use a flat blade or a tool specifically designed for removing door trim to carefully pop it out. Be cautious not to damage the door or let the black stuff from the trim go everywhere. Take your time and keep it away.
Drilling Holes for the Mirror
Now that the door trim is removed, we can proceed to drill holes for the mirrors. Start by determining the placement of the center hole using a simple technique involving fishing line. Once you have marked the center point, you can drill a pilot hole with a three millimeter drill bit. Take extra care to ensure that you will not drill into any Glass. Once the pilot hole is drilled, proceed to enlarge it with a 40 millimeter step to accommodate the mirror mounting.
Attaching the Mirror
With the holes drilled, it's time to attach the mirrors. Peel off any tape or protective covers and clean the holes if necessary. Carefully Align the mirror with the holes and fix it in place. Take note of any challenges you may encounter during this step, such as reaching tight spaces or protecting the mirror from damage.
Dry Run Fit
Before finalizing the installation, do a dry run fit to ensure everything is in place as intended. Check for any obstructions or fitment issues. In some cases, you may need to remove certain badges or accessories to allow for proper installation. Make any necessary adjustments or modifications before moving on to the next step.
Removing the GXR Badge
In some cases, the GXR badge may obstruct the proper fitment of the Clear Views. If this is the case, you will need to remove the badge before proceeding. Use a hairdryer to heat up the adhesive and gently pry off the badge with fishing line or a similar tool. Take Care not to damage the surrounding area.
Wiring the Lights
Now that the mirrors are securely attached, it's time to wire the lights. Connect the appropriate wiring looms for the central locking and power windows to the control module. Take your time to ensure all connections are secure and properly insulated. This step may require some patience and Attention to Detail.
Wiring Challenges and Solutions
Wiring can often pose challenges during the installation process. Take note of any difficulties you may encounter and come up with solutions to address them. For example, using a tape catcher to prevent metal filings from going everywhere can make the process smoother. Look for innovative ways to simplify the wiring process and share any tips or tricks you discover.
Finishing the Installation
Once the wiring is complete, it's time to finish the installation. Reassemble the door trim, ensuring all clips are properly aligned and engaged. Take a moment to admire the final result and make any final adjustments if necessary. Step back and appreciate the enhanced vision the Clear Views provide.
Adding Puddle Lights
As an extra feature, you may choose to add puddle lights to your installation. These lights can be connected to the doors, so they illuminate when the doors are opened. This can add a stylish and functional touch to your vehicle. Follow the instructions provided with the puddle lights and carefully wire them into the existing electrical system.
Wrapping the Wiring
To protect and organize the wiring, consider wrapping it with electrical tape. This will prevent any loose wires and ensure a neat and professional appearance. You can use a tool like an eight-millimeter socket to make the wrapping process easier and more efficient.
Conclusion
Congratulations! You have successfully installed the Clear Views on your vehicle. It may have been a challenging and time-consuming process, but the end result is worth it. Enjoy the improved visibility and sleek appearance provided by the Clear Views. If you have any questions or need further assistance, don't hesitate to reach out. Safe travels!
Highlights:
- Explore the step-by-step process of installing Clear Views on your vehicle.
- Detailed instructions and tips to ease your installation Journey.
- Overcome wiring challenges and learn innovative techniques.
- Enjoy enhanced visibility and a sleek appearance.
FAQ:
Q: Can I install Clear Views myself?
A: Yes, you can install Clear Views yourself. However, be prepared for a challenging and time-consuming process. Ensure that you follow the instructions carefully and take your time to do it right.
Q: How long does the installation process take?
A: The installation process can vary depending on your experience and the specific vehicle model. On average, it can take several hours to complete the installation.
Q: Are Clear Views compatible with all vehicle models?
A: Clear Views are designed to be compatible with a wide range of vehicles. However, it's essential to check the product specifications and compatibility before making a purchase.