Upgrade Your Ride with Rocksta Basher Suspension Mods

Table of Contents

1. Introduction
2. Issue with the Suspension
3. Removing the Shocks
4. Modifying the Ball Joints
5. Smoothing the Ball
6. Comparison of Modified and Unmodified Ball Joints
7. Fitting Everything Back Together
8. Improved Suspension Performance
9. Conclusion

Article

Introduction

Welcome to another tutorial from RC Empire! In this video, we will be discussing a free modification tip that can Instantly improve the performance of your truck. If you enjoy this video, please subscribe for more informative content.

Issue with the Suspension

Let's start by identifying the issue with the suspension. When observing the rear suspension, You'll Notice that the movement is jagged and jerky compared to the smooth movement of the front suspension. The problem lies in the ball joints that connect the plastic body of the suspension to the metal shafts of the shock absorbers. These ball joints are incredibly tight, restricting the suspension from moving freely and limiting its travel and articulation. As a result, the axles become locked in place, hindering the overall performance of the truck.

Removing the Shocks

To address this issue, we need to start by removing the shocks. Begin by removing the top part of the shocks, which involves taking off the nut to expose the screw. This screw is the component that we will be working on.

Modifying the Ball Joints

To free up the suspension, we need to modify the ball joints. Carefully remove the ball joint by completely detaching it from the screw. Be cautious not to damage the Threads during this process. Once the ball joint is removed, you will need a fine file to gently rough the circumference of the ball. The goal is to take a very fine layer of metal off the outer edge of the ball, slightly reducing its diameter. It is crucial to maintain a smooth and rounded surface, avoiding any flat spots on the ball.

Smoothing the Ball

After filing the ball, it's important to smooth it down further to reduce friction. Use a piece of very fine wet and dry paper, around 2000 grit, to sand down the ball. While sanding, make sure to continuously rotate the ball to avoid creating any flat spots. This step is vital to allow the ball to move freely and prevent any rough surface on the ball from wearing out the plastic socket.

Comparison of Modified and Unmodified Ball Joints

Once you are satisfied with the modification, insert the ball joint back into the socket. You will notice an immediate improvement in movement, as the ball now moves freer and smoother. Comparing the modified ball joint to the unmodified one, the difference in smoothness and ease of rotation is evident. The modified ball joint ensures optimal performance and articulation of the suspension.

Fitting Everything Back Together

With the ball joints modified, it's time to reassemble the shocks. Make sure to fit everything back together properly. Once everything is fitted back together, you'll witness the marked improvement in the suspension's overall performance. The plastic parts now move without any jerky or locking movements, allowing the metal shafts to stay Parallel with the plastic sleeves. The suspension now provides full and free articulation throughout the length of the shocks.

Improved Suspension Performance

By implementing this simple modification, you will experience enhanced performance in your crawler. The smooth movement of the suspension allows for better traction, improved maneuverability, and increased stability. With the suspension now free to move at any angle, the axles can twist without any resistance, enabling the truck to tackle challenging terrains with ease.

Conclusion

In conclusion, this modification tip is a quick and cost-free solution to significantly enhance your truck's suspension performance. By modifying the ball joints and ensuring smooth movement, you can unlock the full potential of your crawler. Enjoy the improved capabilities and have a blast exploring new terrains with your enhanced truck.

Highlights

• Discover a free modification tip to instantly improve your truck's performance
• Identify the issue with the suspension and why it restricts movement
• Learn how to remove and modify the ball joints to free up the suspension
• Understand the importance of smoothing the ball to reduce friction
• Witness the difference between modified and unmodified ball joints
• Experience the improved suspension performance and increased articulation
• Achieve better traction, maneuverability, and stability in challenging terrains
• Enhance your crawler's capabilities with a simple and cost-effective modification

FAQ

Q: How does the tightness of the ball joints affect the suspension? A: The tight ball joints restrict the movement of the suspension, leading to jerky and limited articulation.

Q: Can I use a different grit of sandpaper for smoothing the ball? A: It is recommended to use very fine wet and dry paper around 2000 grit for optimal results.

Q: Will this modification work for other RC models? A: The modification can be applied to various RC models with similar ball joint setups for improved suspension performance.