Fixing Undetected Graphics Card on Windows 10/11: A Step-by-Step Guide

Table of Contents

1. Introduction
2. Troubleshooting the Error Code 43
   • 2.1. Updating USB Hub Drivers
   • 2.2. Checking for File System Errors
   • 2.3. Updating Display Adapter Drivers
   • 2.4. Managing Power Settings for USB Devices
   • 2.5. Performing a System Restore
3. Conclusion

Resolving the Windows Error Code 43: A Step-by-Step Guide

If you are encountering the frustrating "Windows has stopped this device because it has reported problems. (Error Code 43)" message on your computer, don't worry! In this Tutorial, we will provide you with simple and effective solutions to resolve this error and get your Windows computer back to normal. So, let's dive right in and fix the issue.

1. Introduction

The Error Code 43 occurs when Windows encounters a problem with a device driver. This error can affect the performance of your computer and cause inconvenience. But fear not, as we have outlined a series of troubleshooting steps below to help you resolve this issue.

2. Troubleshooting the Error Code 43

2.1. Updating USB Hub Drivers

The first step is to update the USB hub drivers. To do this, follow these simple steps:

1. Open the Start menu and search for "Device Manager".
2. Click on the "Device Manager" option that appears.
3. Expand the "Universal Serial Bus controllers" section.
4. Right-click on any generic USB hub listed and select "Update Driver".
5. Choose "Browse my computer for drivers" and then "Let me pick from a list of available drivers on my computer".
6. Select the appropriate driver and click "Next".
7. Click "Close" to finish the update.

Updating the USB hub drivers can often resolve the Error Code 43 and ensure smooth functioning of your devices.

2.2. Checking for File System Errors

In some cases, file system errors can contribute to the Error Code 43. To check for and fix these errors, follow these steps:

1. Open File Explorer by selecting the icon in the taskbar.
2. Right-click on the local drive where Windows is installed and select "Properties".
3. Go to the "Tools" tab and click on the "Check" button under Error Checking.
4. Select "Scan drive" to initiate the scan.
5. If any errors are found, follow the prompts to fix them.
6. Once the scan is complete, click "Close".

By resolving any file system errors, you can eliminate potential causes of the Error Code 43.

2.3. Updating Display Adapter Drivers

Outdated or faulty display adapter drivers can also trigger the Error Code 43. To update the display adapter drivers, follow these steps:

1. Open the Device Manager again using the Start menu search.
2. Expand the "Display adapters" section.
3. Right-click on the listed display adapter and select "Properties".
4. Go to the "Driver" tab and click on the "Update Driver" button.
5. Choose "Browse my computer for drivers" and then "Let me pick from a list of available drivers on my computer".
6. Select the appropriate driver and click "Next".
7. Click "Close" to finish the update.

Updating the display adapter drivers ensures compatibility and can help resolve the Error Code 43.

2.4. Managing Power Settings for USB Devices

Sometimes, power management settings for USB devices can interfere with their proper functioning. To manage these settings, follow these steps:

1. Open the Device Manager and navigate to the USB devices section.
2. Double-click on each USB device and look for the "Power Management" tab.
3. Uncheck the option that says "Allow the computer to turn off this device to save power".
4. Click "OK" to apply the changes.
5. Repeat this process for all applicable USB devices.

By disabling power management for USB devices, you can prevent them from being turned off and avoid encountering the Error Code 43.

2.5. Performing a System Restore

If the above steps did not resolve the Error Code 43, you can try performing a system restore. This will revert your computer's settings to a previous working state. Here's how to do it:

1. Open the start menu and search for "System Restore".
2. Click on the "System Restore" option that appears.
3. Follow the prompts to choose a restore point and initiate the restore process.
4. Wait for the restoration to complete and restart your device.

Performing a system restore allows you to undo any recent changes that may have caused the Error Code 43.

3. Conclusion

In conclusion, the Error Code 43 can be a frustrating issue on Windows computers. However, by following the troubleshooting steps outlined in this guide, you can successfully resolve this error and get your computer back to its optimal state. Remember to update your USB hub and display adapter drivers, check for file system errors, manage power settings for USB devices, and perform a system restore if necessary. By doing so, you can eliminate the Error Code 43 and enjoy a seamless computing experience.

Thank you for reading this tutorial, and we hope it has been helpful. Good luck with resolving the Error Code 43!

Highlights

• Resolving the "Windows has stopped this device because it has reported problems. (Error Code 43)"
• Troubleshooting steps for fixing the Error Code 43
• Updating USB hub and display adapter drivers
• Checking for file system errors
• Managing power settings for USB devices
• Performing a system restore

FAQ

Q: What causes the Error Code 43 on Windows? A: The Error Code 43 is typically caused by issues with device drivers. It can occur when a driver becomes outdated, corrupted, or incompatible with the operating system.

Q: Can updating drivers fix the Error Code 43? A: Yes, updating drivers, especially for USB hubs and display adapters, can often resolve the Error Code 43. It ensures compatibility and addresses any bugs or glitches that may be causing the issue.

Q: Will performing a system restore delete my files? A: No, performing a system restore will not delete your personal files. It only reverts your computer's settings to a previous state. However, it is always recommended to back up your important files before performing a system restore, just in case.

Resources:

• Microsoft Support
• [Driver manufacturer websites] (if applicable, for specific driver updates)