XFX Fat Boy vs Sapphire Nitro+: The Ultimate RX 590 Showdown

Find AI Tools
No difficulty
No complicated process
Find ai tools

XFX Fat Boy vs Sapphire Nitro+: The Ultimate RX 590 Showdown

Table of Contents:

  1. Introduction
  2. Design of the XFX Fat Boy
  3. Dimensions of the Card
  4. Display Outputs
  5. Opening up the Card
  6. PCB and Heatsink
  7. Performance Comparison with Sapphire RX 590 Nitro+
  8. Thermals and Noise Levels
  9. Power Consumption
  10. Manual Overclocking
  11. Conclusion

🔹Introduction: The XFX Fat Boy is a graphics card that is priced at £250 and offers solid performance for 1080p gaming. In this article, we will delve into the design, dimensions, display outputs, and other features of this card. We will also compare its performance with the Sapphire RX 590 Nitro+ and evaluate its thermals, noise levels, power consumption, and overclocking potential. By the end of this article, you'll have a complete understanding of what the XFX Fat Boy brings to the table.

🔹Design of the XFX Fat Boy: The design of the XFX Fat Boy is a subjective matter. It features a black plastic shroud with a faux carbon fiber finish, which some may find unappealing. The front of the shroud houses two red-hubbed 100mm fans and some ridges for added visual interest. While the design may not be everyone's cup of tea, it does have its own unique aesthetic.

🔹Dimensions of the Card: The XFX Fat Boy measures 270mm x 124mm x 53mm, making it an average-sized card for 2018. Despite its name, it is not significantly larger than other cards in its class. The dimensions make it compatible with most modern cases and offer a balance between performance and space requirements.

🔹Display Outputs: The XFX Fat Boy features three DisplayPort outputs, one HDMI 2.0b, and one DVI port. These display outputs provide ample connectivity options for multi-monitor setups or connecting to various display devices.

🔹Opening up the Card: Opening up the XFX Fat Boy is a straightforward process that requires the removal of six screws from the backplate. Once opened, we can get a closer look at the PCB (Printed Circuit Board) and heatsink design.

🔹PCB and Heatsink: The XFX Fat Boy utilizes a six-plus-one power phase design, with six phases for the GPU and one phase for the memory. The GPU is based on the Polaris architecture and fabricated using a 12-nanometer process. The heatsink features four heat pipes (two 6mm and two 8mm) that connect to a copper cold plate, which helps dissipate heat from both the GPU and the memory chips.

🔹Performance Comparison with Sapphire RX 590 Nitro+: In terms of performance, the XFX Fat Boy performs similarly to the Sapphire RX 590 Nitro+ Special Edition. Both cards offer an 8 to 10 percent improvement over the RX 580, making them suitable for smooth gameplay at 1080p resolution. However, the Sapphire RX 590 Nitro+ has a slight edge due to its higher boost clock and overclocked memory out of the box.

🔹Thermals and Noise Levels: When it comes to thermals, the XFX Fat Boy performs well in the performance BIOS mode, peaking at 69 degrees Celsius under load. However, in the stealth BIOS mode, it runs slightly warmer, reaching a peak of 80 degrees Celsius. Noise levels are also affected by the BIOS mode, with the stealth BIOS being quieter at just over 41 decibels and the performance BIOS being louder at over 48 decibels.

🔹Power Consumption: The XFX Fat Boy consumes around 225 watts under load, which is slightly more efficient than the Sapphire RX 590. However, compared to the GTX 1060 or GTX 1070, the RX 590 is still relatively power-hungry and less efficient.

🔹Manual Overclocking: Manual overclocking on the XFX Fat Boy yielded only minor gains in performance. The core clock was stable at 1615 MHz, while the memory could be pushed to 1750 MHz. However, the increased noise levels (52 decibels) outweighed the marginal performance boost, making manual overclocking less desirable.

🔹Conclusion: In conclusion, the XFX Fat Boy is a decent graphics card for 1080p gaming, offering a performance boost over the RX 580 at a price of £250. However, considering the marginal price difference, the Sapphire RX 590 Nitro+ provides a better balance between thermals and noise levels. While the XFX Fat Boy has an either-or situation in terms of thermals and noise, the Sapphire RX 590 Nitro+ maintains a consistent level of performance and quiet operation.

Most people like

Are you spending too much time looking for ai tools?
App rating
4.9
AI Tools
100k+
Trusted Users
5000+
WHY YOU SHOULD CHOOSE TOOLIFY

TOOLIFY is the best ai tool source.

Browse More Content