Boost Your PC's GPU Performance with This 2022 Guide

Table of Contents

1. Introduction
2. Causes of low GPU frequency
   • GPU load and frame limiters
   • CPU/RAM bottleneck
3. Fix for RX 6000 series
4. Fix with MSI Afterburner
5. Disabling Ultra Low Power Saver mode
6. Impact of low GPU frequency on performance
7. Suggestions for upgrading CPU or RAM
8. Conclusion

Article

Introduction

Welcome to my Channel! In today's video, I will be providing a small tutorial on how to fix low GPU frequency. This issue can cause performance problems, but fortunately, there are two common causes and fixes for it. So, let's get started and dive into the details.

Causes of low GPU frequency

There are two main causes of low GPU frequency: GPU load and frame limiters, as well as CPU/RAM bottlenecks.

GPU load and frame limiters: When playing graphics-intensive games or using applications that put a heavy load on the GPU, such as video editing software, the GPU should ideally operate at its maximum frequency. However, if there is a CPU or RAM bottleneck, or if You have enabled frame limiters, the GPU may not be able to operate at its full potential. As a result, it will lower its frequency to conserve power and maintain efficiency.

CPU/RAM bottleneck: If your CPU or RAM is unable to keep up with the demands of the GPU, the GPU will experience low GPU usage. In this case, the GPU frequency will also decrease to save power. This can result in reduced performance and lower FPS.

Fix for RX 6000 series

If you are using the RX 6000 series graphics card, there is a specific fix that can help resolve the low GPU frequency issue. Here's what you need to do:

1. Open the Radeon settings.
2. Go to the Performance tab.
3. Click on "Tuning" and enable your Core frequencies.
4. Set the minimum frequency to be 100 MHz lower than the maximum frequency.
5. For example, if your GPU typically operates at 2400 MHz, set the minimum frequency to 2300 MHz and the maximum frequency to 2400 MHz.

By setting the minimum frequency slightly lower than the maximum frequency, you can ensure that the GPU frequency stays consistent, even during periods of lower GPU usage. This will help prevent any decrease in performance.

Fix with MSI Afterburner

Another fix for low GPU frequency is to use MSI Afterburner. If you already have this software installed, follow these steps:

1. Open MSI Afterburner and go to the Options menu.
2. Navigate to the General tab.
3. Scroll down to find the "Disable ULPS" option.
4. Disable ULPS (Ultra Low Power Saver) mode.

By disabling ULPS, you are effectively telling the Radeon or Nvidia drivers to disregard the low power state modes. This can help maintain a consistent GPU frequency in 3D applications and prevent any performance loss.

Impact of low GPU frequency on performance

When your GPU operates at a lower frequency, it can negatively impact performance, resulting in lower FPS and potential stuttering. If you Notice significant frequency drops, such as down to 500 MHz or even 600 MHz, then there may be a problem that needs to be addressed.

Suggestions for upgrading CPU or RAM

If you find that your GPU frequency is consistently low and the fixes Mentioned above do not provide a satisfactory solution, it may be worth considering upgrading your CPU or RAM. A CPU or RAM bottleneck can limit your GPU's performance and prevent it from reaching its full potential. Therefore, investing in a more powerful CPU or upgrading your RAM can help alleviate this issue and improve overall system performance.

Conclusion

In conclusion, low GPU frequency can be a frustrating problem that hinders your gaming or graphic-intensive experience. However, in most cases, it can be addressed by understanding the causes and implementing the appropriate fixes. Whether it's adjusting the core frequencies for RX 6000 series cards or disabling ULPS with MSI Afterburner, these solutions can help ensure that your GPU operates at its maximum frequency and delivers optimal performance. If all else fails, upgrading your CPU or RAM may be necessary. Thank you for watching, and don't forget to like, subscribe, and share this video!