Effortlessly Remove Willys Jeep Hub & Brake Drum!

Effortlessly Remove Willys Jeep Hub & Brake Drum!

Table of Contents:

1. Introduction
2. Removing the Nut and Cotter Pin
3. Using a Hub Puller to Remove the Hub and Drum
4. Proper Placement of the Key
5. Removing the Backing Plates and Axles
6. Separating the Drum from the Hub
7. Pressing the Studs Out of the Hub
8. Tips for Pressing the Studs Out
9. Using a Jig for Stud Removal
10. Conclusion

Removing and Replacing Hub and Drum: A Step-by-Step Guide

Introduction

When it comes to maintaining the wheels of your vehicle, specifically the hub and drum, it is important to know how to properly remove and replace them. In this guide, we will walk you through step-by-step instructions on how to remove the hub and drum, as well as provide helpful tips and techniques for a smooth process. So let's get started!

Removing the Nut and Cotter Pin

The first step in removing the hub and drum is to remove the nut and cotter pin. The nut is usually located under the Dust cap of the wheel. Use pliers or a wrench to remove the cotter pin, then remove the nut with the appropriate-sized socket.

Using a Hub Puller to Remove the Hub and Drum

To remove the hub and drum, a hub puller is required. This tool is designed to safely and effectively separate the hub from the tapered shaft. Place the hub puller onto the hub and drum, securing it with lug nuts. Lubricate the screw and tighten it using a wrench. Tap the dog bone with a hammer to tighten the screw further. Once secure, begin tapping the hub puller to release the hub and drum. The hub should come off with ease, but some may require more force.

Proper Placement of the Key

Once the hub and drum are removed, be sure to properly place the key. The key is essential for securing the hub and preventing it from rotating on the axle. Tap the key out of its position, paying Attention to the tapered side of the hub and axle slot. The key should fit snugly in the correct place to prevent the hub from splitting.

Removing the Backing Plates and Axles

Now that the hub and drum are removed, it is time to remove the backing plates and axles. Start by removing the nuts and bolts that secure the backing plates to the axle housing. Once the backing plates are off, You will find a retainer and outer oil seal. Ensure that the bottom hole of the seal is open and functioning properly.

Separating the Drum from the Hub

To separate the drum from the hub, a brake drum swedge cutter is necessary. This tool is specifically designed to remove the pressed area of the stud, allowing for easy removal. Align the swedge cutter with the stud and mill away the pressed area. This will prevent any damage to the hub or drum and ensure a smooth separation.

Pressing the Studs Out of the Hub

After the drum is separated from the hub, it is time to press out the studs. Use a press and a custom-made jig to accurately and safely remove the studs. Position the hub and drum on the jig, ensuring that each stud is centered. Press each stud out individually, taking care not to damage the hub or drum.

Tips for Pressing the Studs Out

When pressing the studs out, use a solid jig underneath the hub and drum. This will provide stability and prevent any movement during the pressing process. Additionally, cutting off a portion of the stud before pressing can make the removal process easier and prevent any damage to the hole in the hub.

Using a Jig for Stud Removal

To simplify the stud removal process, consider using a custom-made jig. This jig can be made from a block of steel with drilled holes to align with the studs and raised areas of the drum. This jig provides stability and ensures accurate placement during the pressing process.

Conclusion

Removing and replacing the hub and drum may seem daunting, but with the right tools and techniques, it can be a manageable process. By following the step-by-step instructions in this guide, you can safely remove and replace the hub and drum, ensuring optimal performance and longevity for your vehicle. Remember to take your time, use the appropriate tools, and exercise caution throughout the process.