Power up your production with Honda EU6500is Inverter Generator

Table of Contents

1. Introduction
2. The Features of the Honda Putt-Putt Jenny
3. Startup Procedure
4. Turning Off the Honda Putt-Putt Jenny
5. Cabling Up the Jenny
6. Using Snack Packs for Power Distribution
7. The Importance of Using Proper Wiring Gauge
8. Safety Precautions When Operating the Honda Putt-Putt Jenny
9. Maximum Power Draw and Wattage Ratings
10. Tips for Using the Honda Putt-Putt Jenny Effectively

The Honda Putt-Putt Jenny: A Reliable Power Source for Your Lighting Equipment

The cinema industry heavily relies on powerful and efficient generators to provide reliable and uninterrupted power supply to their lighting equipment. One such generator that has gained popularity among professionals is the Honda Putt-Putt Jenny. With its 6500-watt capacity and a host of impressive features, the Putt-Putt Jenny is a reliable companion on any film set.

1. Introduction

As a rental service provider, Cinema Verde takes pride in offering high-quality equipment, including the renowned Honda Putt-Putt Jenny. In this article, we will guide You through the key features of the Honda Putt-Putt Jenny and provide you with step-by-step instructions on its startup procedure and shutdown process. Additionally, we will discuss best practices for cabling up the Jenny and highlight the importance of using proper wiring gauge for safety purposes.

2. The Features of the Honda Putt-Putt Jenny

The Honda Putt-Putt Jenny is a 6500-watt Macs generator specifically designed to meet the demanding power requirements of the cinema industry. Its continuous power rating of 5500 watts makes it an ideal choice for running a wide range of lights. Let's Delve into some of its notable features:

• Fuel Efficiency: Before starting up the Jenny, it's essential to top off the fuel tank to ensure a smooth and uninterrupted power supply. The high-octane fuel and stable operation of the generator guarantee long-lasting performance throughout the day.

• User-Friendly Controls: The Putt-Putt Jenny has a simple and intuitive control panel. It features a starter key with three positions - off, on, and start - allowing easy and quick startup. The fuel switch and the echo throttle, primarily used for other purposes, are both set to the off position for cinematic lighting applications.

• Starter Options: The generator offers two starting options - electric start and recoil starter. While the electric start is the primary method, the recoil starter can be used as a backup option in case of a dead battery. Both starting procedures are straightforward and quick.

• Breaker Switches: The generator is equipped with two breaker switches that protect the outlets. In the event of a breaker tripping, simply push the breaker switch back in to restore power. The generator also features a 60 amp Bates connector and two Edison receptacles for convenient power distribution.

• Power Indicators: The front panel of the Honda Putt-Putt Jenny includes various indicators that provide crucial information during operation. These indicators include a power-on light, overload alarm, and low oil level warning. The overload alarm alerts users when the power draw exceeds the generator's capacity, ensuring safe electrical usage.

3. Startup Procedure

To successfully start the Honda Putt-Putt Jenny, follow these simple steps:

1. Ensure the fuel tank is topped off to maximize runtime.
2. Set the fuel switch to the 'on' position.
3. Insert the starter key and turn it to the 'start' position.
4. Allow the generator to start, and when running smoothly, switch the key to the 'on' position.
5. Verify the power-on light indicator to ensure a stable power supply.

4. Turning Off the Honda Putt-Putt Jenny

When it's time to turn off the generator, follow these steps:

1. Flip the starter key to the 'off' position.
2. Turn the fuel switch to the 'off' position.
3. Ensure the fuel flow is turned off from the handles.
4. Swing the handles up and lock them into position for safe transportation.
5. To unlock the handles, push both knobs down and lower the handle.

5. Cabling Up the Jenny

Properly setting up the power distribution from the Honda Putt-Putt Jenny is crucial for efficient lighting operations. Here's how to cable up the generator:

1. Use the 60 amp Bates cable to connect the lighting equipment to the generator. The thick and heavy copper wiring guarantees minimal voltage loss.
2. Plug one end of the Bates cable into the generator and secure it.
3. Raise the handle of the generator to prevent accidental disconnection.
4. Tie off the cable to ensure it remains fixed in place.
5. Position the other end of the cable at a suitable distance from the generator, considering audio concerns.
6. If needed, use a Sixty-to-sixty splitter to turn one power output into two.

6. Using Snack Packs for Power Distribution

For Simplified power distribution and added safety, consider using snack packs. Snack packs are electrical outlets equipped with individual breakers, allowing you to isolate power issues without affecting the entire setup. By plugging your lighting equipment into snack packs, you can easily manage power distribution and troubleshoot any breaker trips efficiently.

7. The Importance of Using Proper Wiring Gauge

When powering your lighting equipment, it is crucial to use wiring with an adequate gauge to handle the power demands effectively. Substandard extension cords or wiring can lead to significant safety risks, such as overheating, electrical shocks, or even fires. It is recommended to use 12-gauge entertainment cable with Hubble connectors for optimal performance and maximum safety.

8. Safety Precautions When Operating the Honda Putt-Putt Jenny

While the Honda Putt-Putt Jenny is designed to provide reliable power, it is essential to adhere to certain safety precautions during its operation. Here are some safety guidelines:

• Maintain a minimum clearance of three feet around the generator to prevent any potential hazards. Avoid placing any objects on top of the generator, and ensure proper ventilation to dissipate heat effectively.

• Always turn off the fuel flow before moving the generator to prevent any fuel leakage accidents. The handles of the generator can be locked into position for secure transportation.

• Be cautious when connecting and disconnecting loads from the generator. Ensure the load is within the generator's capacity, and monitor the power draw on the display to prevent overload.

9. Maximum Power Draw and Wattage Ratings

Although labeled as a 6500-watt generator, the Honda Putt-Putt Jenny can only sustain peak power draw for approximately 30 minutes before the risk of overheating arises. It is crucial to consider the wattage ratings of each lighting instrument and electrical equipment when calculating the total power draw. For optimal performance and to prevent damage to the generator, it is recommended to keep the total power draw at or below 5500 watts.

10. Tips for Using the Honda Putt-Putt Jenny Effectively

To ensure a seamless experience when using the Honda Putt-Putt Jenny, keep the following tips in mind:

• Familiarize yourself with the power requirements of your lighting equipment. Each instrument should have its wattage rating listed, enabling you to calculate the total power draw accurately.

• Consider running computers or sensitive electronic equipment from a separate power source, such as a house outlet, to avoid potential noise interference or accidental power cutoffs.

• Communicate with your electricians to coordinate power management effectively. Ensure they consult you before disconnecting the generator to prevent any disruption to ongoing processes, such as footage transfers.

• Optimize the placement of the generator to minimize noise interference. When shooting indoors, place the generator at least 50 feet away to reduce noise disturbance.

By following these guidelines and utilizing the Honda Putt-Putt Jenny effectively, you can achieve reliable and uninterrupted power supply for your cinematic lighting needs without the need for larger, more expensive generators.

Highlights

• The Honda Putt-Putt Jenny is a 6500-watt generator designed for the cinema industry.
• It offers features such as fuel efficiency, user-friendly controls, and breaker switches for convenient power distribution.
• The startup procedure involves topping off the fuel and using the starter key and fuel switch.
• Proper cabling ensures efficient power distribution, using 60 amp Bates cables and snack packs for added safety.
• Using the Honda Putt-Putt Jenny requires adhering to safety precautions, including maintaining clearance and monitoring power draw.
• The maximum power draw should be kept below 5500 watts to prevent overheating.
• Tips for effective use include considering wattage ratings, managing sensitive electronic equipment separately, and coordinating with electricians.

FAQ

Q: Can I use regular extension cords with the Honda Putt-Putt Jenny? A: No, it is not recommended. Regular extension cords may not have the wiring gauge required to handle the power demands of cinematic lighting equipment, posing safety risks. It is advised to use 12-gauge entertainment cable with Hubble connectors.

Q: How long can the Honda Putt-Putt Jenny sustain peak power draw? A: The generator can sustain peak power draw for approximately 30 minutes before the risk of overheating arises. It is crucial to manage power effectively and keep the total power draw below 5500 watts for optimal performance.

Q: Can I run computers off the Honda Putt-Putt Jenny? A: It is generally recommended to run computers and sensitive electronic equipment off a separate power source, such as a house outlet. This helps avoid potential noise interference or accidental power cutoffs that may occur when using the generator.

Q: What is the recommended placement distance for the Honda Putt-Putt Jenny during indoor shoots? A: To minimize noise interference, it is advisable to place the generator at least 50 feet away from the shooting location when shooting indoors. This helps prevent noise disturbances from affecting audio quality.

Q: Can the Honda Putt-Putt Jenny power older HMI lights with magnetic ballasts? A: Older HMI lights with magnetic ballasts can generate noise in the power line, which may interfere with computer equipment. It is best to run computers off a separate power source and use the generator exclusively for powering lights.

Q: Do I need to notify electricians before turning off the Honda Putt-Putt Jenny? A: Yes, it is essential to communicate with your electricians to ensure coordination. Inform them before disconnecting the generator to prevent any disruption to ongoing processes, such as footage transfers.